DE
Die Rundstrahlantenne Ubiquiti airMAX OMNI AMO-3G12 erhöht die Reichweite und erhöht die Übertragungsgeschwindigkeit des Access Points. Das Gerät arbeitet im 3-GHz-Band. Das Modell airMAX OMNI AMO-3G12 hat einen maximalen Verstärkungspegel von 12 dBi und ein Stehwellenverhältnis (VSRW) von 1,6:1.
Omni Omni Omni AMO-3G12 Omni-Omni-Antenne von Ubiquiti ist ein hochwertiges 2x2-MIMO-Gerät mit doppelter Polarität. Die airMAX OMNI AMO-3G12 Antenne lässt sich nahtlos in das RocketM-Funkgerät integrieren und bildet eine leistungsstarke 360°-Basisstation für eine hohe Netzwerkleistung.
AirMAX-Antennen sind für Außenanwendungen konzipiert und daher robust konstruiert.
Jede airMAX-Antenne hat einen eingebauten Rocket-Halter, so dass für die Installation der Rocket BaseStation kein Werkzeug benötigt wird.
Features / filters | |
Antennenfrequenz | 3 GHz |
Antennengewinn | 10dBi - 20dBi |
Typ der Antenne | Rundstrahl- |
Antenne Zunahmeniveau (max) | 12 |
Antennentyp | Sektorantenne |
Anwendung | Draußen |
Breite | 1030 |
Elektrische Abweichung | 4° |
Frequenzband | 3.4 - 3.7 |
Gewicht | 2,05 |
Horizontale Breite des Bündels | 360° |
Horizontale Lichtstrahlbreite | 8 |
Höhe | 84 |
Kompatibel mit der Marke | Ubiquiti |
Kreuzpolarisations-Isolation | >25 dB |
Menge pro Packung | 1 |
MIMO-Typ | 2x2 |
Montage | Wand |
Polarisation | Duale Polarisation |
Polarisierung | Dual-linear |
Spannung Stellung-Welle Verhältnis (VSWR) | 1,6:1 |
Tiefe | 122 |
Verbindungstyp | 2x RP-SMA |
Vertikale Lichtstrahlbreite | 4 |
VSWR | 1.6:1 |
Warentarifnummer (HS) | 85177100 |
Zweck | Outdoor |
Grundlegende technische Parameter | |
Abmessungen (mm) | 1012 X 122 X 105 |
Gewicht | 2,05 kg |
Frequenzband | 3,4 GHz - 3,7 GHz |
Gewinn | 12 dBi |
Abstrahlwinkel der Fassade | 8° |
Maximaler VSWR | 1.6:1 |
Ausstrahlungswinkel | 4° |
Windwiderstand | 200 km/h |
Windlast | 111,2 N bei 200 km/h |
Polarisierung | Vertikal und horizontal (dual) |
Interpolarisations-Isolierung | Mindestens 25 dB |
ETSI | EN 302 326 DN2 |
Installationsausrüstung | Universal-Stangenhalter, RocketM-Halter und wasserdichtes Koaxialkabel im Lieferumfang enthalten |
1. Przymocuj kable RF do złączy oznaczonych jako Chain 0 i Chain 1 na urządzeniu.
2. Wyrównaj uchwyty montażowe z tyłu obudowy z uchwytem kieszeni i przesuń w dół, aby ją zablokować.
3. Przymocuj pozostałe końce kabli do złączy sygnałowych na antenie.
4. Włóż cztery śruby mocujące do głównego uchwytu wspornika anteny.
5. Przymocuj antenę do górnej części słupa:
a. Przesuń zacisk słupka na każdą parę śrub nośnych.
b. Zabezpiecz każdy zacisk za pomocą dwóch nakrętek ząbkowanych.
c. Dokręć wszystkie nakrętki do około 25 N-m.