Simple network equipment that forms the basis of local infrastructure should be reliable. If the network design does not require advanced configuration, the Totolink switch will prove to be a good choice for many applications. It will connect devices equipped with wired network cards, depending on the number of LAN ports. Whether it's a desktop switch to set up on your desk or a 1U rack-mount version, everything depends on your needs. Totolink is a ZIONCOM brand with a tradition going back to 1999. It introduces good quality network equipment to the world market at attractive prices. It gains a constantly growing number of customers from almost every market segment.
Reliable Totolink switch - construction and standards
Totolink's compact network devices are characterized by extraordinary simplicity combined with reliability. They comply with the Ethernet standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 8023ab. Usually each port has a clear number and status display using an LED. Simple Totolink switches have several parameters:
- number of LAN ports,
- Fast Ethernet or Gigabit Ethernet speed standard,
- type of housing:
- rack - for installation in rack standard cabinets,
- desktop switch - to put or hang.
They don't provide PoE power, but they are supplied with power from the set. According to the manufacturer's markings, the Totolink S808G switch is a compact switching device with 8 Gigabit - 10/100/1000BASE-T ports with AUTO-MDIX. S808G 8 ports G igabit has Full Duplex capability. The Totolink S505 will be a RJ45 port x5 fast Ethernet switch with Auto MDI/MDIX on each. Using unshielded UTP cat 4, shielded, straight or crossover cables, you can connect any device equipped with standard network cards . The maximum network capacity will be automatically detected and negotiated.
Totolink desktop switch in LANs
The Totolink switch series with desktop enclosure are extremely compact models. Totolink S505 or S505G switch is slightly smaller than a credit card, Totolink S808G switch is slightly larger. Classic desktop switch is used for mounting on a desk or other flat surface. They are network devices that do not require advanced knowledge of technology, network. It is a typical PlugPlay, where the only task of the user is to connect the switch to the power supply and then connect individual computers, servers or other network devices to the RJ45 port using UTP cat 4 or shielded, avoiding interference. Thanks to fast and reliable switches you can quickly expand your LAN by, for example, 7 devices for S808G 8 ports Gigabit, or as many as 15 or 23 for SW16D and SW24D. The switches work in layer 2 of the network, so packet analysis is minimal and switching is super fast.
Unmanaged Totolink rack switches
Unlike the S-series such as the Totolink S808G, multi-port switches are SW or SG. It is followed by the number of ports, and the possible type of enclosure is the last letter, although in the case of rack switches the model designation ends with the number of ports. Also these switches work in the second layer of the network, providing fast packet switching, while not being able to manage on a higher level. Switches equipped with rack cabinets take up only 1U in racks. They can have a certain number of identical Fast Ethernet ports - SW16, SW24, or Gigabit Ethernet SG16, SG24. The ports even work in Full Duplex mode, providing up to 2000 mbps of throughput. They also do not allow to use PoE power supply as in the case of smaller switches. Each of the ports has the possibility of automatic connection negotiation. The rack housing also allows to stack switches as well as store them as desktop devices. Switche Totolink is an excellent, cheap alternative that works in places, no advanced network configurations are required.