EN
The TL-PA8010P Gigabit Powerline Transmitters kit allows you to extend your home wired network to any room within the building using the existing electrical network. This means you can set up a new network by simply connecting two adapters without laying cables. With speeds of up to 1300 Mbps for uninterrupted streaming of HD video and online games, the PA8010P is the ideal partner for home entertainment.
The set of TP-LINK TL-PA8010P network transmitters enables the user to connect to the Internet from any electrical outlet in the home network. TL-PA8010P supports 2x2 MIMO technology with beam shaping, together with HomePlug AV2 technology it significantly increases data transfer speed. It uses two lines of electrical cables in a three-wire network to increase performance. It is a great solution for anyone who wants to cover large areas of the Internet, but does not want to pull cables all over the house. Just plug it into an electrical outlet and you can enjoy smooth Ultra HD video playback, online gaming or faster downloads right away.
The TL-PA8010P offers an integrated passthrough socket for up to 16 A, which can be used as a wall outlet. Connect your Smart TV or game console to the integrated socket as if it were a normal wall outlet. You won't lose any electrical outlet in the house. An output of up to 16 A is suitable for plugging in high-power electrical devices.
With its practical design and sophisticated power-saving mode, the PA8010P's next-generation network adapter will automatically switch from normal operation to power-saving mode, reducing power consumption by up to 85%. The integrated noise filter helps prevent electrical signal interference that affects the efficiency of the power supply.
Features / filters | |
Maximum wireless transmission speed | 1300 Mb/s |
Number of LAN ports | 1x [100/1000M (RJ45)] |
Wireless network standards | IEEE 802.11a, IEEE 802.11b, |
AC input frequency | 50 |
AC input voltage | 220 |
Built-in power socket | Yes |
Cables included | LAN (RJ-45) |
Certification | CE |
Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
Depth | 71.7 |
Ethernet LAN | Yes |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Ethernet LAN interface type | Gigabit Ethernet |
Height | 79 |
LED indicators | LAN, PLC, Power |
Linux operating systems supported | Yes |
Mac compatibility | Yes |
Mac operating systems supported | macOS |
Maximum data transfer rate | 1300 |
Maximum operating distance | 300 |
Modulation | OFDM |
Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Package depth | 190 |
Package height | 100 |
Package weight | 730 |
Package width | 230 |
Plug and Play | Yes |
Power consumption (standby) | 0.5 |
Power consumption (typical) | 6 |
PowerLine standard | HomePlug AV2 |
Product colour | White |
Quantity per pack | 2 |
Quick installation guide | Yes |
Security algorithms | 128-bit AES |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Sustainability certificates | RoHS |
Throughput through the electric network | 1300Mb/s |
Width | 130.7 |
Windows operating systems supported | Windows 2000,Windows 7,Windows 8,Windows 8.1,Windows XP |
Equipment features | |
Plug type | EU |
Standards and protocols | HomePlug AV2, HomePlug AV, IEEE1901, IEEE802.3, IEEE802.3u, IEEE802.3ab |
Ports | 1 Gigabit Ethernet port Electricity socket |
Buttons | Pair button |
Power consumption | Maximum: 6W (220V/50Hz) On average: 6W (220V/50Hz) In standby mode: 0.5W (220V/50Hz) |
LED | PWR, PLC, ETH |
Dimensions (S x G x W) | 131×72×42 mm (5.2×2.8×1.7 inches) |
Reach | Up to 300m within the building |
Current in the built-in socket | 16 A |
Software functions | |
Modulation | OFDM (PLC) |
Transmission encryption | 128 bit AES encryption |
Other | |
Certificates | CE, RoHS |
Package contents | TL-PA8010P x2 RJ45 Ethernet cable CD Quick Installation Guide |
System requirements | Windows 2000/XP/2003/Vista, Windows 7, 8, Mac, Linux |
Working environment | Operating temperature: 0℃~40℃ (32℉~104℉) Storage temperature: -40℃~70℃ (-40℉~158℉) Operating humidity: 10%~90%, non-condensing Storage humidity: 5%~90%, non-condensing |
In most cases TP-Link network adapters will pair automatically. If not, press the pairing buttons to pair them or use the tpPLC tool to do so. For detailed instructions, refer to [APP] or [tpPLC Utility].
You can press the pairing buttons to add another device or use the tpPLC tool.
For MAC 10.6 or higher, there is a Powerline tool to manage the network adapters.
For Ubuntu or older versions of MAC there is no configuration tool for them, please configure the adapters in Windows. Or use the pairing buttons to pair them and use the web interface to configure our wireless network adapters.
That's not necessary. Just keep the way the existing adapters / extensions connect to the old router. If you want to change the wireless settings of the extension cables to be the same as those of the new router, press the WPS button on the router and then the Wi-Fi button on the card.
Yes, WPS is just one way of copying the SSID / WiFi name from the main router. If there is no WPS button on the router, we can manually copy the Wi-Fi settings.