Contact
Account
Favorite
0 pcs
Promotions
New products
Discounts
Micro blowing fibre optic cable is a single-mode cable with a diameter of 5.8 mm, number of fibres 72J type G652D embedded in 6 tubes after 12 fibres. Microcables are used in microcables, in which they are placed by blowing.
| Features / filters | |
| Cabel for assembly | Micro duct, Outside the building, |
| Fiber standard | G.652.D |
| Number of fibers | 72F |
| Cable diameter | 5,8mm |
| Tensil strenght | 1 kN |
| Design | |
| Number of fibres | 72 (Glass Fiber) |
| Number of fibres per tube | 12 (Glass Fiber) |
| Number of loose tubes | 6 (PBTP) |
| Moisture barrier | Above the FRP rod and the core (WS Yarn - water swelling yarn) |
| Outer shell | Nominal 0.5 mm (HDPE - black) |
| Number of ripcords | 1 (polyester) |
| Cable diameter | 5.8 ± 0.3 mm |
| Crushing strength | 1000 N (IEC 60794-1-2-E3) |
| Impact resistance | 1 N.m (IEC 60794-1-2-E4) |
| Twisting | ± 360° (IEC 60794-1-2-E7) |
| Kink | 10 x D (IEC 60794-1-2-E10) |
| Minimum bending radius | 20 x D (IEC 60794-1-2-E11) |
| Water penetration test | 1 m water column, 3 m sample, 24 hours (IEC 60794-1-2-F5) |
| Environmental characteristics | |
| Installation | -30°C to 70°C (IEC 60794-1-22-F1) |
| Action | -30°C to 70°C (IEC 60794-1-22-F1) |
| Storage | -30°C to 70°C (IEC 60794-1-22-F1) |
| Fibre characteristics | |
| Fibre type | ITU-T G.652D |
| Optical | |
| Repression | For 1310 nm it is: ≤ 0.36 dB/km For 1550 nm it is: ≤ 0.23 dB/km |
| Chromatic dispersion | For 1285 - 1330 nm it is: ≤ 3.5 ps/nm.km At 1550 nm it is: ≤ 3.5 ps/nm.km ≤ 18.0 ps/nm.km |
| Cable cut-off wavelength | For λcc is: ≤ 1260 nm |
| Zero-dispersion wavelength | 1300 - 1324 nm |
| Zero-dispersion slope | ≤ 0.092 ps/nm^2 x km |
| Fashionable polarisation dispersion | For Fibre is: ≤ 0.2 ps/km For Link Design Value is: ≤ 0.08 ps/km |
| Mechanical | |
| Bending damping | 1 twist - φ 32 mm for 1550 nm is: ≤ 0.05 dB 100 turns - φ 50 mm for 1310 nm and 1550 nm is: ≤ 0.05 dB 100 turns - φ 60 mm for 1625 nm is: ≤ 0.05 dB |
| Proof Stress Level | 1.0% (100 kpsi) |
| Geometric | |
| Diameter of the module field | For 1310 nm it is: 9.2 ± 0.4 µm For 1550 nm it is: 10.4 ± 0.5 µm |
| Module field concentricity error | ≤ 0.5 µm |
| Coat diameter | 125 ± 0.7 µm |
| Ellipticality of the coat | ≤ 0.7% |
| Shell concentricity error | ≤ 12 µm |
| Diameter of main shell | 245 ± 10 µm |
| Main shell material (uncoloured) | UV Cured Acrylate |
| Fibre Curl Radius | ≥ 4 m |
| Technical Specification - EN | Download |
