The FGCD Chad Sensor from Fibaro, certified, guarantees exceptional precision in measuring the Chad in your home. It effectively detects even slightly elevated amounts of carbon monoxide (CO), which may cause discomfort and deterioration of mood in the long run. At higher concentrations, it will immediately notify you of the danger. The Z-Wave Charge sensor can operate as a stand-alone device, without any communication with the FIBARO system, and its operation is constantly monitored. It is a compact solution designed for wall mounting. The sensor is battery-powered.
The built-in temperature sensor will allow you to precisely control heating and air conditioning. You can connect the WIFI chad sensor to the FIBARO system, thanks to which you will benefit from the measurements provided. By detecting temperature surges, the sensor can reveal the fire hazard. Each Chad sensor is inspected to meet strict quality requirements.
Simple and easy to understand markings will allow anyone, in an instant, to assess the risk of chad. Acoustic alarm warns of dangerous carbon monoxide concentration, also indicates sensor status and low battery level. It works even when there is no power at home. LED expands the alarm and information functions, a red light indicates danger, other colours indicate the sensor mode, battery level or identification of the device.
The Charge Charge Chargers for the gas stove, fireplace and other devices will immediately inform you of increased levels of carbon monoxide by sending a message to your smartphone. With FIBARO you will always find out about the danger wherever you are. Using the application based on Z-Wave you have instant access to information.
| Features / filters | |
| Alarm decibels | 85 |
| Battery voltage | 3 |
| Built-in display | No |
| Certification | RED 2014/53/EU RoHS 2011/65/EU EN 50291-1:2010 |
| Compatible battery sizes | CR123A |
| Connectivity technology | Wireless |
| Depth | 28 |
| Height | 65 |
| Interconnectable | Yes |
| LED indicators | Yes |
| Mounting kit | Yes |
| Mounting type | Surface-mounted |
| Number of batteries supported | 1 |
| Operating relative humidity (H-H) | 10 - 95 |
| Operating temperature (T-T) | 0 - 50 |
| Power source type | Battery |
| Product colour | Silver, White |
| Quantity | 1 |
| RF transmission frequency | 869 |
| Test button | Yes |
| Width | 65 |
| Technical Specification | |
| The range of measurement of CO | 0-450 ppm |
| Service life under optimal conditions | 8 years |
| Accuracy of measurement | ±10 ppm/±5% |
| Ambient temperature during operation | 0° to 50°C |
| Ambient humidity during operation | 10% to 95%, non-condensing |
| Alarm siren sound level | 85 dBA at 3 meters |
| Alarm response times with default settings | 50 ppm 60-90 min 100 ppm 10-40 min 300 ppm < 1.5 min |
| Compliance with EU directives | RED 2014/53/EU RoHS 2011/65/EU EN 50291-1:2010 |
| Radio protocol | Z-Wave (500 series chip) |
| Radio transmission power | up to -5 dBm (EIRP) |
| Radio frequency | 868.4, 868.42, 869.8 MHz EU 908.4, 908.42, 916.0 MHz US 921.4, 921.42, 919.8 MHz ANZ 869.0, 869.02 MHz RU |
| Radio range | up to 50 m outside up to 40 m indoors (depending on the terrain and structure of the building) |
| Dimensions | 65 x 28 mm (diameter x height) |
| Power supply | CR123A/CR17345 battery, 3.0 V DC |
