FIBARO Dimmer 2 is a universal module that smoothly lightens or dims various types of lighting. This small device combines many practical functions. The Dimmer 2 can switch or dim the connected light source via WI-FI or a wall switch directly connected to it. Built-in mechanisms protect the module against short circuit and overload. The solution was designed by the Polish company Fibaro with the intelligent home in mind.
Use smart lighting in your home. FIBARO Dimmer 2 can be mounted in a flush-mounted or surface-mounted box or wall switch. The device does not require any changes to the existing electrical installation. The Dimmer 2 dimming module can be connected to a two- or three-wire installation, which means working with or without a neutral wire. Easy configuration and high compatibility is ensured by the algorithm of intelligent light source detection used in the device.
FIBARO Dimmer 2 allows a wide range of wireless lighting control with WIFI and Z-Wave, thanks to them you can control the light sources in your home with an application on your smartphone. The module enables measurement of energy consumption, which will allow you to make better use of the lighting, which will translate into reduced energy expenditure. Your smart home will be illuminated according to your needs, but with optimal energy consumption.
| Technical Specification | |
| Power supply | 100-240 V~ 50/60 Hz |
| Operating temperature | 0° to 35°C |
| Power consumption | < 1.3 W |
| Dimensions | 42.5 x 38.25 x 20.3 mm (L x W x H) |
| For mounting in boxes | Ø ≥ 50 mm |
| Working current | 0.25-1.1 A |
| Thermal protection of the device | 105°C |
| Active element | Semiconductor electronic switch ε |
| Radio signal strength | Up to 1 mW |
| Radio protocol | Z-Wave |
| Control of the device | Remote - radio waves Directly - external switch |
| Radio frequency | 868.4, 869.85 MHz EU 908.4, 916.0 MHz US 921.4, 919.8 MHz ANZ 869.0 MHz RU 919.8 MHz HK 868.1 MHz MY 865.2 MHz IN 915.0 Mhz to 917.0 Mhz IL 922.0 MHz to 926.0 MHz JP 868.4 MHz CN, KR |
| Radio transmitter power | Up to 6 dBm (EIRP) |
| Reach | up to 50 m outside up to 30 m inside buildings (depending on building materials) |
| Compliance with EU directives | RED 2014/53/EU RoHS 2011/65/EU |
