FIBARO Smoke Sensor 2 is a compact smoke sensor, temperature sensor and fire alarm signaled by a sound, blinking visual indicator that sends the alarm to Z-Wave and control commands. The built-in optical sensor allows detection of smoke in the early stages of a fire, during a rise in temperature and often before the flames appear.
When the smoke detector detects a threat, starts the alarm scene and immediately receives a notification on the phone. At such moments control the situation is a priority. The Smoke Sensor 2 allows for integration with the Fibaro System and other devices. The smoke detector collects information about smoke and temperature, and creating a smoke history increases the security of your home thanks to data analysis.
Smoke Sensor 2 works well in sensitive rooms, e.g. in the boiler room and in places where the household members are most often. Adjust the sensitivity of the sensor to the type of room to avoid false alarms. In rooms where smoke should not normally appear, set smoke sensor to maximum sensitivity level for the best protection.
|Operating temperature||0°C to 55°C|
|Moisture||0% to 93%|
|Power supply||battery CR123A/CR17345, 3.0 V DC|
|Temperature measurement range||-20°C to 100°C|
|Accuracy of temperature measurement||0.5°C (within the range from 0° to 55°C)|
|Compliance with EU directives||EN 14604:2005
|Radio transmitter power||up to -5 dBm (EIRP)|
|Dimensions (diameter x height):||65 x 28 mm|
|Radio frequency||868.4, 869.8 MHz EU
908.4, 916 MHz US
921.4, 919.8 MHz ANZ
869 MHz RU
|Reach||Up to 50 m outdoors
Up to 30 m indoors
(depending on the terrain and structure of the building)
It will work well and it is acceptable, but the best work is guaranteed by the ceiling installation.
FIBARO Smoke Sensor 2 is always armed and ready to detect the presence of smoke.
Try to adjust the sensitivity to the presence of smoke, in this case reduce it by setting parameter 1 to position 3 (low sensitivity).