Fibaro FGT-001 ZW5 EU | Temperature controller | range 0-40st C, precision 0,5st C
CODE: FGT-001 ZW5 EU / EAN: 5902701701062
Contact
Account
Favorite
Cart
FIBARO The Heat Controller is a remote-controlled thermostatic head used for room temperature control. The combination of basic functionalities with technology, based on the cubic capacity of the room, allows to calculate the time needed for to reach the desired temperature. The temperature value is indicated on the thermostatic head by colours.
The Fibaro System offers reliable heating through intelligent cooperating with each other thermostatic heads for any number of radiators. Manage the heating manually, remotely, by voice and with an application in each room of your smart house. The Heat Controller allows you to create harmonograms for dynamic, customized changes in room heating, which significantly reduces heating costs.
Thermostatic head supports the most popular types of radiator valves thanks to adapters included in the kit, so it can be installed on as many as 98% of radiators available on the market. FIBARO Heat Controller provides cyclical descaling, preventing scale build-up in the installation. The head is simple in installation, and after installation it performs calibration on its own and checks the correctness of connection.
Thanks to the installed head, you can control the heating of your smart of the house from any place in the world with your smartphone and FIBAROapplication, the temperature value will be adjusted to 0.5°C. With a single touch of the application, switch the heating to holiday mode intended for the period of your holiday or longer trip. The thermostatic head, thanks to anti-freeze technology, will not allow the room to cool down, which can cause the pipes to freeze.
| Power supply | Li-Poly SELV 3.7V battery (not interchangeable) |
| Supported charger (not included) | Micro-USB 5 V DC, min. 0.5 A |
| Technical Specification | |
| Radio frequency band | 868 MHz band |
| Radio protocol | Z-Wave (with S2 function enabled) |
| Operating temperature | 0° to 40°C |
| Storage temperature | -10° to 25°C |
| Maximum water temperature | 90°C |
| Compliance with EU directives | RED 2014/53/EU RoHS 2011/65/EU |
| Supported valves | M30 x 1.5 Danfoss RTD-N Danfoss RA-N |
| Accuracy of temperature measurement | 0.5°C (within the range 0° to 40°C) |
| Dimensions (diameter x length) | 56 x 74 mm 56 x 87 mm (with adapter) |
| Rated pulse voltage | 330 V (when connected to USB power supply) |
The valve is opened completely.
Use of additional temperature sensor: 10 months. No additional sensor: 11 months (error rate + - 25%).
Usually the calibration process takes about 30 seconds.
No, the additional temperature sensor only works with a thermostatic head.
You can use it in scenes, with a heating panel, by hand.
