Fibaro The Heat Controller Pack | Temperature controller | range 0-40st C, precision 0,5st C
CODE: FIBARO THE HEAT STARTER PACK / EAN: 5902701701079
Contact
Account
Favorite
Cart
FIBARO The Heat Controller is a remote control thermostatic head used for temperature control in the room. The combination of basic functionality with technology, based on the cubic capacity of the room, allows to calculate the time needed to achieve the desired temperature. The temperature value is indicated on the thermostatic head by colours. The set also includes the FIBARO Temperature Sensor.
The Fibaro System guarantees reliable heating for any number of radiators through intelligent, cooperating thermostatic heads. Manage the heating remotely, manually, by voice and with an application in each room of your smart house. The Heat Controller allows you to create harmonharmonics for dynamic changes in the heating of rooms dictated by the needs of the household, which significantly reduces heating costs.
Thermostatic head supports the most popular types of radiator valves thanks to adapters included in the kit, which allows you to mount it on up to 98% of radiators available on the market. FIBARO Heat Controller provides cyclical descaling, which protects the fittings from scale build-up. The head is simple in installation, after installation it performs calibration on its own and checks the correctness of connection.
Control the heating of smart of the house with the head, smartphone and FIBAROapplication from any place where you are. You can regulate the temperature with the accuracy of 0.5°C. In the application, with a single touch, switch the heating into holiday mode intended for holiday periods or longer trips. The thermostatic head thanks to anti-freeze technology will also not allow the room to cool down to a temperature that could cause pipes to freeze.
| Thermostatic head | |
| Supported charger (not included) | Micro-USB 5 V DC, min. 0.5 A |
| Power supply | Li-Poly SELV 3.7 V battery (not interchangeable) |
| Radio protocol | Z-Wave (with S2 function enabled) |
| Radio frequency band | 868 MHz band |
| Operating temperature | 0° to 40°C |
| Storage temperature | -10° to 25°C |
| Temperature sensor | |
| Compliance with EU directives | RED 2014/53/EU RoHS 2011/65/EU |
| Maximum water temperature | 90°C |
| Dimensions (diameter x height) | 38 x 12 mm |
| Radio frequency band | 2.4 GHz |
| Supported valves | M30 x 1.5 Danfoss RTD-N Danfoss RA-N |
| Compliance with EU directives | RED 2014/53/EU RoHS 2011/65/EU |
| Dimensions (diameter x length) | 56 x 74 mm 56 x 87 mm (with adapter) |
| Power supply | 3.0 V battery CR2032 (supplied) |
| Accuracy of temperature measurement | 0.5°C (within the range 0° to 40°C) |
| Rated pulse voltage | 330 V (when connected to USB power supply) |
| Operating temperature | 0° to 40°C |
| Radio transmitter power | Up to -4 dBm (EIRP) |
You can use it in scenes, with a heating panel, by hand.
No, the additional temperature sensor only works with a thermostatic head.
Use of additional temperature sensor: 10 months, without additional sensor: 11 months (error rate + - 25%).
The valve is opened completely.
Usually the calibration process takes about 30 seconds.
