EN

MikroTik wAP 60Gx3 AP | Access point | RBwAPG-60ad-SA, 60GHz, 1x RJ45 1000Mb/s

CODE: RBWAPG-60AD-SA / EAN: 4752224004819

MikroTik wAP 60Gx3 AP | Access point | RBwAPG-60ad-SA, 60GHz, 1x RJ45 1000Mb/s

CODE: RBWAPG-60AD-SA / EAN: 4752224004819
188,74 GBP without VAT (net)
Out of stock
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: 60 GHz
2.4 GHz: No
Show more parameters

About product

MicroTik wAP 60Gx3 AP

Mikrotik Routerboard RBwAPG-60ad-SA is a new access point model for 60 GHz frequencies. Compared to the usual wAP 60G AP model, this new model has a completely new antenna layout, with support for a much wider angle of coverage and is optimized specifically for multipoint operation.

MicroTik wAP 60Gx3 AP

Provides connectivity for up to eight client devices at the same time

96 antenna elements work in beam shaping technology to provide connectivity for eight client devices 60 GHz at the same time, in the field of view 180 degrees. Build a cost effective point-to-multipoint installation in a clean 60 GHz wireless band, at a fraction of the price. It has a powerful IPQ-4019 quad-core processor with 716 MHz and 256 MB RAM. It has a gigabit Ethernet port and offers maximum wireless 1 Gb/s throughput.

MicroTik wAP 60Gx3 AP

wAP 60Gx3 AP

Two wAP 60Gx3 AP modules can also be used in point-to-point configuration. The device operates with Mikrotik RouterOS level 4 software. MikroTik wAP 60Gx3 AP can be mounted on a wall (e.g. on the facade of a building), the set includes also a stand that can be placed on a desk. Power supply can be provided via DC or PoE plug, input voltage range is 12 - 57 V DC. The access point can also be powered by PoE in 802.3af/at standard. A 24 V / 0.38 A power supply and gigabit PoE injector are included.

MicroTik wAP 60Gx3 AP

The most important features:

  • RouterOS Level4, can work as an AP
  • Operation in the 60 GHz band (802.11ad standard)
  • Antenna with a beam of about 180°
  • Throughput up to 1 Gb/s
  • Housing suitable for outdoor installation
  • 256 MB RAM
  • IPQ-4019 processor (4 cores, 716 MHz clocking)
MicroTik wAP 60Gx3 AP

Specification

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Number of LAN ports 1x 10/100/1000BaseTX (RJ45)
Operating frequency 60 GHz
2.4 GHz No
5 GHz No
AC adapter included Yes
AC input voltage 12 - 57
Bandwidth 60
Built-in processor Yes
CPU frequency 717 MHz
DC-in jack Yes
Depth 30
Device type Client device
Ethernet LAN (RJ-45) ports 1
Ethernet LAN data rates 10,100,1000
Flash memory 16
Harmonized System (HS) code 85176990
Height 185
Internal No
Internal memory 256
Maximum outdoor range 800
Mounting kit Yes
Networking standards IEEE 802.3af,IEEE 802.3at
Operating system installed RouterOS
Operating temperature (T-T) -40 - 70
PoE adapter included Yes
Power consumption (max) 11
Power over Ethernet (PoE) Yes
Product colour White
RAM memory 256MB
Type of device power supply PoE 802.3af/at
Width 85

Basic technical parameters:
Product code RBwAPG-60ad-SA
Architecture ARM 32bit
CPU IPQ-4019
Number of processor cores 4x
Nominal processor frequency 716 MHz
Dimensions 185 x 85 x 30 mm
Licence level 4
Operating system RouterOS
Size of RAM 256 MB
Storage size 16 MB
Type of storage FLASH
Tested ambient temperature From -40 ° C to 70 ° C
PoE in 802.3af / at
PoE at the input Voltage 20–57 V.
Number of DC inputs 2 (DC socket, PoE-IN)
DC socket input voltage 12–57 V.
Maximum energy consumption 11 W.
Ethernet interface 1 Gigabit Ethernet port 10/100/1000 Mbps
Case law " RED, FCC, IC, EAC, ROHS
Set composition The device
2 cable ties (plastic)
The tray
Mounting bracket
Power supply 24 V DC / 0.38 A
Gigabit PoE injector
Metal ring
Mounting kit

Support

Downloads:

Brochure (ENG) Download
Short guide (ENG) Download

Faq

What is the PoE power supply for ?

PoE allows you to use a single cable for power and data transmission, saving you money on purchasing and dragging cables for network devices and VoiP phones.

What is a MicroTik RouterOS?

MikroTik RouterOS is the operating system of the router and software that allows the PC or Mikrotik RouterBoard to be a dedicated router.

What is the default user name and password for RouterOS?

User name is 'admin' and there is no password (press 'Enter'). To change password use '/password' command.

188,74 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.