EN
Teltonika FMB020 is an ultra-compact vehicle tracker with GNSS, GSM, Bluetooth and OBDII connector for vehicle connection. It is the ideal tracker for a wide range of applications including light commercial vehicle fleet management, driver registration, insurance telematics (UBI), car rental, leasing and more.
The FMB020 supports a collision detection function that allows you to be notified when a car accident occurs. Using accelerometer data captured during a collision, it is possible to visualize the angle and measure the force at which the cars collided. This can be useful in insurance telematics solutions. The device supports various Bluetooth low-power sensors, beacons, hands-free kits, firmware updates and Bluetooth configuration.
Features / filters | |
Communication type | Bluetooth, OBDII, |
Battery capacity | 45 |
Battery life (max) | 1 |
Battery technology | Lithium-Ion (Li-Ion) |
Battery type | Rechargeable |
Battery voltage | 3.7 |
Bluetooth | Yes |
Built-in display | No |
Built-in memory | Yes |
Built-in memory capacity | 0.128 |
Certification | CE/RED, E-Mark, EAC, RoHS, REACH, SIRIM QAS |
Depth | 52.6 |
Electronic compass | No |
Height | 26 |
Housing material | Plastic |
International Protection (IP) code | IP41 |
LED indicators | Status |
Memory card slot(s) | No |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -40 - 85 |
Product colour | Black |
Protection features | Dust resistant |
Purpose | Car |
SIM card capability | Single SIM |
SIM card slot | Yes |
Storage relative humidity (H-H) | 5 - 95 |
Storage temperature (T-T) | -40 - 85 |
USB connector type | Micro-USB |
USB port | Yes |
USB version | 2.0 |
Weight | 63 |
Width | 29.1 |
Module | |
Model | Teltonika TM2500 |
Technology | GSM/GPRS/GNSS/BLUETOOTH |
GNSS | |
GNSS | GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS |
Receiver | 33 channel |
Tracking sensitivity | -165 dBM |
Position accuracy | < 2,5 m |
Speed accuracy | < 0.1m/s (within error limits /- 15%) |
Hot start | < 1 s |
Warm start | < 25 s |
Cold start | < 35 s |
Mobile network | |
Technology | GSM |
2 G bands | Quad-band 850/900/1800/1900 MHz |
Data transfer | GPRS Multi-Slot Class 12(up to 240 kbps) |
Data handling | SMS (text/data) |
Power supply | |
Input voltage range | 10-30 V DC with overvoltage protection |
Spare battery | 3.7 V 40 mAh (no final specifications available) |
Bluetooth | |
Specification | 4.0 LE |
Supported peripherals | Temperature and humidity sensor, headset, Inateck barcode scanner, support for universal BLE sensors |
Physical specification | |
Dimensions | 52.6 mm x 29.1 mm x 26 mm (L x W x H) |
Interfaces | |
Connectivity | ODBII socket |
GNSS antenna | Internal with high profit |
GSM antenna | Internal with high profit |
USB | 2.0 Micro-USB |
LED signalling | 2 status LEDs |
SIM | Nano-SIM |
Work environment | |
Operating temperature (without battery) | -40 °C to 85 °C |
Storage temperature (without battery) | -40 °C to 85 °C |
Operating humidity | 5% to 95% non-condensing |
Degree of protection | IP41 |
Battery charging temperature | 0 °C to 45 °C |
Battery discharge temperature | -20 °C to 60 °C |
Battery storage temperature | -20 °C to 45 °C for 1 month -20 °C to 35 °C for 6 months |
Features | |
Sensors | Accelerometer |
Scenarios | Eco driving, speeding detection, jamming detection, GNSS fuel meter, excessive idling detection, disconnection detection, towing detection, collision detection, automatic geofence, manual geofence, travel |
Sleep modes | GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep |
Configuration and firmware upgrade | FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application |
SMS | Configuration, events, debugging |
GPRS commands | Configuration, debugging |
Time synchronization | GPS, NITZ, NTP |
Fuel monitoring | GNSS Fuel meter |
Ignition detection | Accelerometer, external supply voltage |
1. open the top cover of the unit. The cover is opened by unzipping it in the corner recess.
Insert the Nano-SIM card as shown with PIN request turned off. Make sure the Nano-SIM card is properly installed in the holder. 3.
3) Connect the battery as shown in the picture.
After configuring see " PC connection (Windows)", plug the device cover back in.