EN
The airFiber AF-11G35 antenna provides SISO or 2x2 MIMO signal with double polarity. Below is one example of how the AF-11G35 antenna with the AF-11FX radio can be placed as an end point in a link to deliver the SISO or 2x2 MIMO signal to an adjacent tower. From there, the airMAX sector antenna with Rocket radio delivers bandwidth to WISP clients.
For existing Ubiquiti Networks AF-5 and AF-5U, the AF-11G35 provides a fast and convenient upgrade path to the licensed 11 GHz band. The AirFiber AF-11G35 uses the same antenna mount as the airFiber AF-5 and AF-5U simply replace it with the AF-11G35. Replace the unlicensed 5GHz link in full duplex with a licensed 11GHz link in full duplex.
The AF-11G35 antenna has a built-in mount for the AF-11FX radio, so installation does not require any special tools. Snap the airFiber AF-11FX radio into place and mount the antenna, then you will get the optimal combination of airFiber X antenna and radio for 11 GHz PtP applications.
Features / filters | |
Antenna frequency | 11 GHz |
Antenna type | Directional |
Energy gain | >31 dBi |
Antenna gain level (max) | 35 |
Compatible with brand | Ubiquiti |
Connector type | RP-SMA |
Depth | 460 |
Frequency band | 10 - 11.7 |
Height | 811 |
Horizontal beamwidth | 2.5° |
Mounting kit | Yes |
Product colour | White |
Survival wind speed | 200 |
Vertical beamwidth | 2.5° |
VSWR | 2:1 |
Weight | 16.5 |
Width | 811 |
Wind load | 200 |
Basic technical parameters | |
Dimensions | 811 × 811 × 811 × 460 mm |
Weight | 16.5 kg |
Frequency | 10.3-11.7 GHz |
Gain | 35 dBi |
HPOL Beamwidth | 2,5° |
VPOL Beamwidth | 2,5° |
Maximum VSWR | 2:1 |
Wind survivability | 200 km/h |
Wind load | 1538 N @ 200 km/h |
Polarisation | Default H/V When the OMT is rotated ±45° |
Cross-insulation | 35 dB |
Mounting | It uses the AF-5 mounting system. |
Pattern regulatory | ETSI 302 217-4-2, class 3 and FCC Cat B |
The OMT (OrthoMode Transducer) is located on the back of the antenna. The default polarization is H and V. To use ±45° slant polarization:
1. Remove the screws.
2. Rotate the OMT so the arrows point to -45° and +45°
3. Replace the screws
11 GHz antenna frequency
Direction