Ubiquiti ES-12F-EU | Switch | EdgeMAX EdgeSwitch, 12x SFP, 4x RJ45 1000Mb/s

![Ubiquiti ES-12F-EU | Switch | EdgeMAX EdgeSwitch, 12x SFP, 4x RJ45 1000Mb/s Ilość portów LAN4x [10/100/1000M (RJ45)]](https://www.batna24.com/img2/200/225905_1.webp?20989284086)
![Ubiquiti ES-12F-EU | Switch | EdgeMAX EdgeSwitch, 12x SFP, 4x RJ45 1000Mb/s Ilość portów LAN12x [1G (SFP)]](https://www.batna24.com/img2/200/225905_2.webp?20989284086)



EdgeSwitch® Fiber is an aggregation switch that offers robust performance, low latency, and intelligent switching for growing networks.
EdgeSwitch Fiber has 12 SFP ports for fiber optic connectivity, eight of which also support 100 Mbps. For network connections, EdgeSwitch Fiber offers four Gigabit RJ45 ports.
EdgeSwitch Fiber offers the ability to redirect traffic on all ports with simultaneous line rate without losing packets. EdgeSwitch Fiber has total non-blocking bandwidth up to 16 Gbps.
EdgeSwitch Fiber uses an advanced operating system that provides advanced switching functions - VLAN tagging and link aggregation and limited Layer 3 functionality, including static routing and DHCP server functionality.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 4x 10/100/1000BaseTX (RJ45), 12x [1G (SFP)] , |
10G support | No |
AC input frequency | 50/60 |
AC input voltage | 100 - 240 |
Access Control List (ACL) | Yes |
Authentication | Port-based authentication |
Authentication type | IEEE 802.1x,RADIUS |
Basic switching RJ-45 Ethernet ports quantity | 4 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Broadcast storm control | Yes |
Certification | ETSI300-019-1.4 CE, FCC, IC |
Configuring Location Settings (CLI) | Yes |
Console port | RJ-45 |
Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
DC input voltage | 16 - 25 |
Depth | 221 |
DHCP features | DHCP server,DHCP snooping |
Ethernet LAN data rates | 10,100,1000 |
Flow control support | Yes |
Form factor | 1U |
Forwarding rate | 23.81 |
Full duplex | Yes |
Gigabit Ethernet (copper) ports quantity | 4 |
Half duplex | Yes |
Harmonized System (HS) code | 85176990 |
Height | 43 |
Housing material | Steel |
IGMP snooping | Yes |
Installed SFP modules quantity | 12 |
Jumbo frames support | Yes |
LED indicators | Activity, Link, Speed |
Link aggregation | Yes |
MAC address filtering | Yes |
MAC address table | 16384 |
Management | CLI - Command Line Interface, By web browser, |
Management protocols | SNMP v1/v2/v3, Telnet |
Multicast support | Yes |
Networking standards | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ac,IEEE 802.3ad,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Number of queues | 8 |
Number of VLANs | 4093 |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -5 - 40 |
Port mirroring | Yes |
Power consumption (max) | 56 |
Power over Ethernet (PoE) | No |
Power supply included | Yes |
Product colour | Black |
Quality of Service (QoS) support | Yes |
Rack mounting | Yes |
Security algorithms | SSH-1.5,SSH-2,SSL/TLS |
Spanning tree protocol | Yes |
Static route | Yes |
Switch layer | L2/L3 |
Switch type | Managed |
Switching capacity | 32 |
Switching layer | 3, 2, |
System event log | Yes |
Type of case | Rack (1U), Desktop, |
Virtual LAN features | Private VLAN,Tagged VLAN,Voice VLAN |
VLAN support | Yes |
Web-based management | Yes |
Weight | 2.59 |
Width | 443 |
Basic technical parameters | |
Dimensions | 443 × 221 × 43 mm (17,44 × 8,70 × 1,69") |
With mounting brackets | 2.68 kg (5.91 lb) |
Without mounting brackets | 2.59 kg (5.71 lb) |
Non-blocking throughput | 16 Gbps |
Maximum power consumption | 56W |
Power supply method | AC 100-240VAC/50-60 Hz, universal input DC 56W, 25 to 16 V, with 2.5 mm. DC power connector |
Power supply | AC/DC, internal, 56W DC |
Range of supported voltages | 100 to 240VAC 25 to 16VDC |
Network Interfaces | (8) Ethernet ports SFP 100/1000 Mbps (4) SFP 1000 Mbps Ethernet ports (4) Ethernet 10/100/1000 Mbps RJ45 ports |
Management interface | (1) RJ45 Serial Port Out-of-Band, Ethernet In-Band |
Installation in a rack | Yes, 1U high |
ESD/EMP protection | Air: ± 24 kV, Contact: ± 24 kV |
Shocks and vibrations | ETSI300-019-1.4 standard |
Operating temperature | -5 to 40° C |
Operating humidity | 5 to 95% |
Certificates | CE, FCC, IC |
EdgeSwitch Fiber is set to DHCP by default, so it will try to get an IP address automatically. If this fails, it will use the default backup IP address 192.168.1.2.
One of the following methods must be used:
- Configure the DHCP server to give a specific IP address to EdgeSwitch based on the MAC address.
- Allow EdgeSwitch to get an IP address, check the DHCP server. Then check which IP address has been assigned.
1. Start your web browser. Enter the appropriate IP address in the address field. Press Enter
2. The login screen will appear. Enter Ubnt in the User name and password field. Click Sign In