![Ubiquiti NBE-M2-13 | CPE | NanoBeam, 2,4GHz, 1x RJ45 100Mb/s, 13dBi Ilość portów LAN1x [10/100M (RJ45)]](https://www.batna24.com/img2/500/131757_2.webp?20989284221)
NanoBeam can be fixed to various surfaces including poles or walls and offers three-axis adjustment. No screws are required for mounting on the pole and only one wall screw is required for mounting on the wall.
NanoBeam is characterized by high gain thanks to its size. The excellent directionality of the NanoBeam provides the best performance in high interference environments.
Ubiquiti's airMAX technology has been proven in many millions of applications worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol enables unparalleled scalability, high throughput and low latency in unlicensed, multipoint networks.
The optional wall mount kit NBE-WMK provides more stability for the NanoBeam on the wall.
airOS is extremely intuitive and has been designed to require no user training. Behind the user interface there is a powerful firmware architecture that enables an efficient multipoint external network.
airView provides advanced functionality of the spectrum analyzer, has views for analysis such as waterfall, waveform and real-time spectral views. This allows operators to identify noise signatures and plan the network to minimize interference.
| Features / filters | |
| LAN standard | Fast Ethernet 10/100Mb/s |
| Number of LAN ports | 1x 10/100BaseTX (RJ45) |
| Operating frequency | 2.4 GHz |
| Antenna gain | 11dBi - 20dBi |
| CPU frequency | 560 MHz |
| Device type | Client device |
| RAM memory | 64MB |
| Type of device power supply | Passive PoE |
| Basic technical parameters | |
| Dimensions | 189 × 189 × 125 mm |
| Weight | 0.530 kg |
| Power supply | 24 V, 0.5 A PoE |
| Maximum electricity consumption | 6W |
| Operating frequency | 2405 - 2475 MHz |
| Gain | 13 dBi |
| Network interface | (1) 10/100 Ethernet port |
| CPU specification | Atheros MIPS 74Kc, 560 MHz |
| Memory | 64 MB DDR2, 8 MB Flash |
| LEDs | (1) Power supply, (1) LAN, (4) WLAN |
| LED signal | Programmable, adjustable to RSSI levels. |
| Channel sizes | 5/8/10/20/30/40 MHz |
| Polarisation | Dual line |
| Case | UV-stabilised plastic |
| Installation kit | On the pole (included), |
| Wind load | 45.4 N at 200 km/h |
| Wind survivability | 200 km/h |
| ESD/EMP protection | air ± 24 kV, contact ± 24 kV |
| Operating temperature | -40 to 80° C |
| Operating humidity | 5 to 95% |
| Wireless approvals | FCC, IC, CE |
| RoHS compliance | Yes |
| Rust resistance test | IEC 68-2-11 (ASTM B117), equivalent to: MIL-STD-810 G Method 509.5 |
| Vibration test | IEC 68-2-6 |
| Temperature shock test | IEC 68-2-14 |
| UV test | IEC 68-2-5 at 40° C equivalent: ETS 300 019-1-4 |
| Rain test | ETS 300 019-1-4, equivalent to: MIL-STD-810 G Method 506.5 |
1. Remove the port cover by pressing down on the center of
the cover and sliding the cover out.
2. Connect an Ethernet cable to the Ethernet port.
3. Replace the port cover.
4. Connect the other end of the Ethernet cable from the
NanoBeam to the Ethernet port labeled POE on the
PoE Adapter.
5. Connect an Ethernet cable from your LAN or computer to
the Ethernet port labeled LAN on the PoE Adapter.
6. Connect the Power Cord to the power port on the PoE
Adapter. Connect the other end of the Power Cord to a
power outlet.
Operating frequency: 2.4 GHz
Operating temperature: -40 to 80° C
