EN
EdgeSwitch XP has been designed to simplify deployment, enhancing data delivery and passive PoE.
EdgeSwitch XP supports 24 V or 48 V passive PoE to power multiple devices in the network.
EdgeSwitch XP provides performance without downtime, it is ideal for companies and businesses.
EdgeSwitch XP is specially designed with robust materials for professional use.
The EdgeSwitch 16XP model can power 24 V or 48 V devices, equipped with a programmable output voltage controller.
Designed for effective configuration and control, the GUI is easy to use and has advanced layer 2 functions.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 16x [10/100/1000M (RJ45)] |
Number of PoE ports | 16x [802.3af/at (1G)] |
Management | CLI - Command Line Interface, By web browser, |
Power (W) | 300 |
Switching layer | 2 |
Type of case | Rack (1U) |
Basic technical parameters | |
Dimensions | 480 × 44,5 × 186 mm |
Weight | 3.95 kg |
Hardware configuration | (2) 8-port EdgeSwitch 8XP |
Installation | 19" 1U Rack Installation |
Power input | 110-120VAC / 210-230VAC |
Maximum energy consumption | 150W |
Output voltage range PoE | 45-48VDC / 22-24VDC |
Maximum Poe power per data port | 11.5W (24 V) 23W (48 V) |
ESD rating | ±24 kV Air/Contact |
PoE method | Passive |
Button | Reset |
USB port | 2.0 Type A |
Processor | MIPS 24K, 400 MHz |
System memory | 64 MB |
Memory code | 8 MB |
Certificates | CE, FCC, IC |
Operating temperature | -25 to 55° C |
Operating humidity | 90% |
PoE configuration per port | Data ports Off/24V/48V |
LEDs per port | Management - Power supply/connection Data Ports - PoE, speed/connection/activity |
Network Interfaces | Management port (1) Ethernet 10/100 Data Ports (8) Ethernet 10/100/1000 ports |
1. Remove the front cover of the EdgeSwitch by pulling the lower part up.
2. Connect a power cable to the power socket on every EdgeSwitch.
3. Secure the EdgeSwitch 16XP in a rack using four philips screws.
4. Attach the upper part of the panel in a slight angle, then shut the lower part. Attach the panel to the EdgeSwitch 16XP using two flathead screws.
5. Plug the power cables to the mains socket.