Ubiquiti UAP-AC-IW-PRO | Access point | Unifi In-Wall, AC1750, MIMO, 3x RJ45 1000Mb/s, PoE+


![Ubiquiti UAP-AC-IW-PRO | Access point | Unifi In-Wall, AC1750, MIMO, 3x RJ45 1000Mb/s, PoE+ Ilość portów LAN3x [10/100/1000M (RJ45)]](https://www.batna24.com/img2/200/294079_2.webp?20989284086)


UniFi AC In-Wall Pro is an access point for wall mounting. It transforms an Ethernet wall connection into a parallel dual-band 802.11AC Wi-Fi access point, with 3x3 MIMO technology and 50% higher radio performance than UAP-AC-IW. The Access Point UniFi AC In-Wall Pro has two Gigabit Ethernet ports, one of which provides PoE power and connects a 802.3af device to the network.
You have unlimited possibilities when building your wireless network, its size depends only on your needs. Start with one device and add up to thousands more, while maintaining a unified UniFi management system.
With access point UAP-AC-IW-PRO, the user has two 10/100/1000 Ethernet data ports, one of which offers the possibility of powering additional devices via PoE+ 802.3at.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Maximum wireless transmission speed | 1750 Mb/s |
Number of LAN ports | 3x 10/100/1000BaseTX (RJ45) |
Operating frequency | Dual Band (2.4GHz, 5GHz) |
Wireless network standards | IEEE 802.11ac, IEEE 802.11b, IEEE 802.11n, IEEE 802.11g, IEEE 802.11a, |
2.4 GHz | Yes |
5 GHz | Yes |
Antenna features | Integrated antenna |
Antenna gain | Under 10dbi |
Antenna type | Integrated |
Antennas quantity | 3 |
Application | Indoor |
Depth | 86.7 |
Ethernet LAN (RJ-45) ports | 3 |
Ethernet LAN data rates | 10,100,1000 |
Height | 25.8 |
Maximum data transfer rate | 1300 |
MIMO Type | 3x3 |
Networking standards | IEEE 802.3at |
Numbers of pieces in the package | 1-pack |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -10 - 50 |
Placement | In-wall |
Polarization | Single polarization |
Power consumption (max) | 10 |
Power over Ethernet (PoE) | Yes |
Product colour | Grey, White |
Products per master (outer) case | 1 |
Security algorithms | AES,TKIP,WEP,WPA-Enterprise,WPA-PSK,WPA2 |
Type of device power supply | PoE 802.3af/at |
Weight | 210 |
Wi-Fi data rate (max) | 1300 |
Width | 139.7 |
Basic technical parameters | |
Dimensions | 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01") |
Weight | 210 g |
Network Interfaces | (3) 10/100/1000 Ethernet ports |
Buttons | Reset |
Power supply methods | 802.3at PoE+ O=supported |
Power supply | UniFi PoE Switch (not included) |
Saving energy | Yes |
PoE Out | 48 V Pass-Through (Pins 1, 2+; 3, 6-) |
Maximum power consumption | 10 W 22 W including PoE Passthrough |
Max. power TX | 22 dBm |
Antennas | 2.4 GHz: 5 dBi 5 GHz: 6.5 dBi |
Wi-Fi standards | 802.11 a/b/g/n/ac |
Network security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
BSSID | Up to four on the radio |
Installation | 1-Gang Electrical Wall Box (not supplied) |
Operating temperature | -10 to 50°C (14 to 122°F) |
Operating humidity | 5 to 95% Noncondensing |
Certificates | CE, FCC, IC |
Advanced traffic management | |
VLAN | 802.1Q |
Advanced QoS | Bandwidth limitation for each user |
Insulation of guests | Yes |
WMM | Voice, Video, Best Effort and Background |
Number of simultaneous clients | 250+ |
Supported data rates (Mbps) | |
Standard | Speed |
802.11ac | 6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2/3, VHT 20/40/80) |
802.11n | 6.5 Mbps to 450 Mbps (MCS0 - MCS15, HT 20/40) |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11b | 1, 2, 5.5, 11 Mbps |
The UAP-AC-IW-PRO access point is characterized by increased wireless transmission performance up to 450 Mbps for 2.4 GHz and 1300 Mbps for 5 GHz in 3X3 MIMO technology.
Simple and quick configuration can be done via UniFi application on iOS or Android. Advanced configuration is available from the UniFi Controller application, for download HERE.