EN
Ubiquiti UF-MM-10G-20 is a set of 20 SFP+ inserts from the U Fiber series, using 850nm wavelengths for data transmission through multi-mode fibers. Each module has 2 LC output connectors. Ubiquiti SFP+ UF-MM-10G-20 inserts offer a transmission speed 10Gbps over a distance to 300m. Multi-mode SFP+ inserts are perfect for use in existing network infrastructure or for creating a new one.
Features / filters | |
Output connector | LC |
SFP module - port speed | 10 Gbps |
Transmission distance | Less then 1km |
Fiber optic connector | LC |
Fiber ports quantity | 2 |
Harmonized System (HS) code | 85369010 |
Interface type | SFP+ |
Maximum data transfer rate | 10000 |
Maximum transfer distance | 300 |
Multi-mode fiber (MMF) supported | Yes |
Number of products included | 20 |
Numbers of pieces in the package | 20-pack |
Product colour | Aluminium |
SFP transceiver type | Fiber optic |
Type of SFP duplex | Physical (two fibers) |
Wavelength | 850 nm, 850, |
Basic technical parameters | |
Transmission speed | 10Gbps |
Distance | 300m |
Type of module | SFP+ |
Output connector | 2 x LC |
Type of transmission | Multi-Mode |
Kind of asshole | Physical (two fibres) |
Wavelength | 850nm |
Declaration of conformity | Download |
For convenient multifunctional connections that go beyond the 100-meter Ethernet cabling limit, UF-MM-10G can be used at distances of up to 300m and speeds of up to 10 Gb/s or UF-MM-1G at distances of up to 550m and speeds of up to 1 Gb/s.
We check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.
The SFP RJ45 module allows you to connect Ethernet cables to SFP sockets in network devices via a special insert equipped with an RJ45 port.