Equipped with RJ45 connector, Ubiquiti UF-RJ45-10G module allows you to connect a copper Ethernet cable to SFP or SFP+ sockets. In the SFP+ port it supports the maximum data transfer speed of Cat 6a using a Cat 6a cable, while in the SFP port it supports the speed of to 1 Gb/s using a Cat 5e cable.
|Basic technical parameters|
|Medium to be handled||Copper|
|Maximum cable length||100 m for 1 Gbps
30 m for 10 Gbps
|Operating temperature||0°C to 70°C (32°F to 158°F)|
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then select the fiber optic cable. Single mode fiber is usually used for longer distances, while multimode fiber is used for shorter distances.
SFP+ is an extension of the SFP standard adapted for transmission speeds of 10 Gbit/s.