EN
The U-Installer provides 24 V PoE power supply to the airMAX CPE. With its internal battery, the U-Installer simplifies your installation toolkit. Position and configure the CPE at the installation site using a tablet or smartphone.
Use the intuitive UNMS application for iOS or Android to set and configure airMAX CPE or other Ubiquiti device.
The U-Installer provides Wi-Fi connectivity to the CPE management interface during installation, so provisioning and final adjustments can be made with a tablet or smartphone.
Features / filters | |
Certification | CE, FCC, IC |
Compatibility | airMAX CPEs |
Depth | 57 |
Height | 38.2 |
Product colour | Black |
Quantity per pack | 1 |
Width | 93 |
Basic technical parameters | |
Dimensions | 93 × 57 × 38,2 mm |
Processor | Atheros MIPS 74KC, 560 MHz |
Memory | 64 MB DDR2 |
Buttons | (1) Reset U-Installer (1) Reset U-Installer external (1) Power On/Off |
Network Interfaces | (1) 10/100 Ethernet port Wi-Fi |
Ports | (1) USB-C port |
PoE passive output | Voltage 24 V Maximum power 12W |
Management interface | Wi-Fi |
Wi-Fi frequency | 2.4 GHz |
Wi-Fi standards | 802.11b/g/n |
Power supply method | Internal battery Mobile USB rechargeable battery: 5V, 3A (not included) |
Power supply | 5 V, 3A |
Voltage range | 4,95 - 5,05 V |
Maximum energy consumption | U-Installer 3W U-Installer with CPE 15W |
LEDs | (1) Wi-Fi (4) Battery |
ESD/EMP protection | 24kV Contact / air |
Operating temperature | 0 to 35° C |
Operating humidity | 5 to 95% |
Certificates | CE, FCC, IC |
Use a mobile device (default method) or a laptop to configure the CPE device at the point of installation via the U-Installer’s Wi-Fi:
1. Power on the U-Installer by pressing the Power button. The Battery LEDs light when the power is on.
2. Connect an Ethernet cable to the PoE OUT port on the U-Installer.
3. Connect the other end of the cable to the CPE device.
PoE passive output 24 V voltage
Maximum power 12W