EN
UniFi® US-24-250W switch from Ubiquiti is a fully managed gigabit switch. The device provides high performance with 24 independent switching ports and 2 SFP ports offering optical connectivity. The switch supports PoE+ 802.3af/at or Passive PoE 24V with a total power of 250W.
The UniFi® US-24-250W switch integrates seamlessly with the UniFi Software-Defined Networking (SDN) platform, creating a highly scalable, comprehensive system of network devices in multiple locations - all controlled from one interface.
The UniFi US-24-250W switch can be easily mounted in a rack cabinet with the included mounting screws.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 24x [10/100/1000M (RJ45)] , 2x SFP (1,25G), |
Number of PoE ports | 24x [802.3af/at (1G)] , 24x [Passive PoE 24V (1G)] , |
10G support | No |
AC input frequency | 50/60 |
AC input voltage | 100 - 240 |
Auto MDI/MDI-X | Yes |
Basic switching RJ-45 Ethernet ports quantity | 24 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Broadcast storm control | Yes |
Cables included | AC |
Certification | CE, FCC, IC |
Console port | RJ-45 |
Depth | 285.4 |
Ethernet LAN data rates | 10,100,1000 |
Flow control support | Yes |
Form factor | 1U |
Forwarding rate | 38.69 |
Harmonized System (HS) code | 85176990 |
Height | 43.7 |
Jumbo frames | 9216 |
Jumbo frames support | Yes |
LED indicators | Activity, Link, PoE, Speed, Status |
Link aggregation | Yes |
MAC address table | 16384 |
Management | CLI - Command Line Interface, Dedicated application, |
Networking standards | IEEE 802.3af,IEEE 802.3at |
Noise level | 53 |
Number of VLANs | 255 |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -5 - 40 |
Power (W) | 250 |
Power consumption (max) | 250 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) power per port | 34.2 |
Power supply included | Yes |
Product colour | Grey |
Rack mounting | Yes |
SFP module slots quantity | 2 |
Spanning tree protocol | Yes |
Switch layer | L2 |
Switch type | Managed |
Switching capacity | 52 |
Switching layer | 2 |
Type of case | Rack (1U), Metal, |
VLAN support | Yes |
Wall mountable | Yes |
Weight | 4.7 |
Width | 485 |
Basic technical parameters | |
Dimensions | 485.04 x 44.45 x 285.6 mm (19.1 x1.75 x 11.24") |
Weight | 3.7 kg (8.16 lb) |
Non-Blocking throughput | 26 Gbps |
Switching capacity | 52 Gbps |
Forwarding Rate | 38.69 Mpps |
Max. power consumption | 250W |
Power supply | 100-240VAC/50-60 Hz |
LED lights | RJ45 ports: PoE, Speed/Link/Activity SFP ports: Speed/Link/Activity |
Network Interfaces | 24 ports 10/100/1000 Mbps RJ45 Ethernet 2 ports 1 Gbps SFP Ethernet |
Management Interface | 1 port RJ45 Serial 2 Ethernet ports In/Out Band |
Certificates | CE, FCC, IC |
Installation in a rack | Yes, 1U |
ESD/EMP protection | Air: ±24 kV, Contact: ±24 kV |
Operating temperature | -5 to 40° C (23 to 104° F) |
Operating humidity | 5 is 95% non-condensing |
Vibration resistance | ETSI300-019-1.4 Standard |
PoE | |
PoE interfaces | POE+ IEEE 802.3af/at (Pins 1,2+; 3, 6-) 24VDC Passive PoE (Pins 4, 5+;7, 8-) |
Max. PoE+ power for each port via PSE | 34.2W |
Voltage range 802.3at | 50–57V |
Max. Passive PoE power per port | 17W |
24V Passive PoE voltage range | 20-27V |
24x Gigabit RJ45 Ports
Management: CLI - Command Line Interface, Dedicated application,
Number of PoE ports: 24x [802.3af/at (1G)] , 24x [Passive PoE 24V (1G)] ,