UniFi Video Camera G3 Flex is a surveillance camera that has a wide-angle lens and a video resolution of 1080p, ensuring monitoring with a large field of view. Ubiquiti cameras give you the opportunity to build a surveillance system with any number of cameras. Wide mounting options - you can mount the camera on your desk, wall or mast, both in indoor and outdoor installations. LEDs on the IR and automatic infrared filter provide high quality day and night monitoring. The G3 Flex also has an adjustable lens and swivel base for vertical and horizontal viewing angle adjustment.
The UniFi application server and the UniFi NVR are equipped with UniFi Video software by default, which allows the immediate implementation of the UniFi application server to configure and manage UniFi video cameras.
The angle of view or monitoring range of the G3 Flex can be changed at any time. Tilt the lens up or down for vertical adjustment. Rotate the base left or right for horizontal adjustment.
Surge protection should be used in all outdoor installations. We recommend using two Ethernet surge protections, model ETH-SP-G2, one near the camera and the other at the entry point to the building. The ETH-SP-G2 will absorb the surges and safely discharge them to earth.
| Features / filters | |
| Resolution | Full HD 1080p |
| Type of camera | IP |
| Application | Universal |
| Built-in microphone | Yes |
| Connectivity technology | Wired |
| Depth | 48 |
| Ethernet interface type | Fast Ethernet |
| Ethernet LAN | Yes |
| Ethernet LAN (RJ-45) ports | 1 |
| Fixed focal length | 4 |
| Form factor | Cube |
| Frame rate | 25 |
| Height | 107.5 |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Infrared (IR) cut-off filter | Yes |
| LED type | IR |
| Matrix size | 2 Mpix |
| Maximum aperture number | 2 |
| Maximum resolution | 1920 x 1080 |
| Mounting brackets included | Yes |
| Mounting kit | Yes |
| Mounting type | Wall/Pole |
| Networking standards | IEEE 802.3af |
| Night vision | Yes |
| Noise reduction | Yes |
| Number of cameras | 5 |
| Number of lenses | 1 |
| Number of sensors | 1 |
| Numbers of pieces in the package | 5-pack |
| Operating relative humidity (H-H) | 20 - 90 |
| Operating temperature (T-T) | -20 - 50 |
| Optical sensor size | 25.4 / 2.7 |
| Package type | Box |
| Placement supported | Indoor & outdoor |
| Power consumption (max) | 4 |
| Power source type | PoE |
| Product colour | White |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Supported video modes | 1080p |
| Total megapixels | 2 |
| Type | IP security camera |
| Weight | 170 |
| Width | 48 |
| Basic technical parameters | |
| Dimensions | Ø 107.5 × 48 mm |
| Weight | 170 g |
| Network interface | (1) 10/100 Ethernet |
| Sensor | 1/3" 2-Megapixel HDR |
| Lens | EFL 4 mm, f/2.0 |
| Night mode | Infrared diode illumination with mechanical IR filter |
| Microphone | Yes |
| Buttons | Reset to factory settings |
| Power supply method | 802.3af PoE |
| Maximum energy consumption | 4W |
| Mounting | Wall-mounted, shell-mounted or standing |
| Ambient temperature range | -20 to 50° C |
| Moisture content range | 20 - 90% |
| Video parameters | |
| Compression method | H.264 |
| Video resolution | 1080p Full HD (1920x1080) |
| Maximum number of frames per second | 25 FPS |
| Image settings | Brightness, Contrast, Flicker Reduction 50/60 Hz, Sharpness, Saturation, Noise Reduction |
| Other features | |
| Angle of vision | With correction: 80° (H), 46° (V), 92° (D) No correction: 87.4° (H), 47° (V), 104° (D) |
| UniFi Video versions supported | UniFi Video 3.9.2 (or higher) |
| UniFi Video system requirements | 64-bit Microsoft Windows 10/8/7, Ubuntu 14.04 or 16.04 or Debian 7.0 with 1.86 GHz Intel processor (or more) and at least 4 GB of RAM |
| Mobile applications | UniFi Video, iOS and Android |
1. Remove the Base Mount from the base of the camera.
2. Insert one end of the RJ-45 cable into the Ethernet Port and the other end into a PoE 802.3af-compliant switch.
3. Attach the camera to the Base Mount by lining up the notches with the slots in the base of the camera. Press firmly together until the camera is secure.
4. Place the camera on a desk or table in its upright position.
5. Adjust the viewing angle or surveillance coverage as needed.
Operating temperature: -20 to 50° C
Video resolution: 1080p Full HD (1920x1080)
