Ubiquiti UVC-G3-LED | IR LED Extender | 6x IR LED, dedicated for UVC-G3
CODE: UVC-G3-LED / EAN: 0810354023361
EN
Additional infrared range extension accessory, significantly extends the night vision range to 25 m.
Basic technical parameters | |
Dimensions | Ø 80 × 26 mm |
Weight | 75 g |
LEDs | (6) Infrared LED |
Infrared range | Up to 25 m |
Power supply | UVC-G3 |
Maximum power consumption | 7,5 W |
Operating temperature | -30 to 70° C |
Working humidity | 20 to 90% |
Quick manual | Download |
1. Pull out the sun visor and remove it. Then remove the
accessory port cover located on the bottom of the UVC-G3.
2. Hold the UVC-G3-LED with the Accessory Connector at
the bottom. Place the LED Ring over the front face of the
camera and insert the LED Ring until it locks into place.
3. Insert the Accessory Connector into the accessory port until
it locks into place.
4. Secure the UVC-G3-LED to the camera by tightening the
two screws located underneath the LED Ring.