EN
Yeastar TA1600 is a high quality and reliable VoIP gateway designed for organizations that want to switch to IP telephony in the office, but are not ready to bear the cost of expensive IP phones. This gateway allows you to continue using your existing phones as it takes care of registering them on your IP-PBX or VoIP provider's server.
Yeastar TA1600 has 16 FXS ports (also available as Telco jack), one network port and supports two VoIP protocols (SIP and H.323) and all modern voice codecs. The gateway is configured using a simple and functional web interface. A console port is also available, but only for specific tasks.
An important feature of the Yeastar TA1600 is its rack mountability. This will be appreciated by all engineers who are used to a clean and tidy server room.
Basic general data | |
Manufacturer | Yeastar |
Type | VoIP gateway |
Model | TA1600 |
Interfaces | |
Telephone interfaces | RJ11 and RJ21 50-pin Telco Connectors |
Network interfaces | 1 x 10/100BASE-T Ethernet |
Ports | 16 FXS ports |
Indicators | Port status and activity LEDs |
Media processing | |
Protocol | SIP (RFC3261), IAX2 |
Transport | UDP, TCP, TLS, SRTP |
Codec | G.711 (alaw/ulaw), G.722, G.723, G.726, G.729A/B, GSM, ADPCM |
Voice capabilities | ITU-T G.168 LEC Echo cancellation, dynamic jitter buffer, VAD, CNG, PLC |
DTMF mode | RFC2833, SIP Info, In-band |
Fax | T.38 and Pass-through |
QoS | DiffServ, ToS, 802.1 P/Q VLAN tagging |
Telephony functions | |
Call handling | 3-way conference, attended and blind transfer, call transfer, caller ID display, call waiting, CDR, direct call to caller ID, distinctive ringing, do not disturb, flexible dial plan, hunt groups, hotline, MWI, speed dial |
Security / IP services | |
Firewall | Built-in Firewall, IP blacklist, attack warning |
Network | DHCP, DDNS, OpenVPN, Static Routing, VLAN |
Nat Traversal | Static NAT, STUN |
Network protocol | FTP, TFTP, HTTP, HTTPS, SSH |
Management | |
Protocols | SNMP, RADIUS, TR-069 |
Provisioning | Web GUI, Auto Provisioning, Backup and Restore, Firmware Upgrade by HTTP/TFTP |
Configuration | Remote Management, Packet Capture, System Logs, Voice Menu for FXS Gateways Basic Configuration, API |
Connectivity | |
Signalling | FXS Loop Start, FXS Kewl Start |
Caller identification | BELL202, ETSI (V23), NTT (V23-Japan) and DTMF-based CID |
Disconnection methods | Busy signal, polarity reversal |
Short and long distances | 3REN, up to 1.5 km on 24 AWG wire |
Physical properties | |
Power supply | AC 100-240V (12V 5A) |
Dimensions | 440 mm × 250 mm × 44 mm |
Operating temperature | 0°C to 45°C 32°F to 113°F |
Storage temperature | -20°C to 65°C -4°F to 149°F |
Humidity | 10-90% non-condensing |
Mounting | Desk mounting Rack-mounting |
Compatibility | |
Softswitch and IP-PBX | Works with a wide range of IPPBX and softswitches BroadSoft certified |