EN
Yeastar TA3200 is a powerful multi-port FXS voice gateway designed for medium and large businesses. The main purpose of this device is to integrate conventional phones and/or fax machines with modern IP-PBXs supporting VoIP protocols, but without physical RJ11 connectors.
In addition to these connectors, the Yeastar TA3200 also has two Telco ports that can be split into a cross panel for connecting handsets. The device has one 10/100 Mbit/s Fast Ethernet port for network connectivity. There is also a console port, but this is only for highly specialized tasks, as all configuration is done in an intuitive web interface.
Since the Yeastar TA3200 FXS gateway can be classified as an enterprise-class device, it is no surprise that it can be mounted in a standard rack. And for quick visibility of the device's status, it is equipped with all necessary light indicators
Basic general data | |
Manufacturer | Yeastar |
Type | VoIP gateway |
Model | TA3200 |
Interfaces | |
Telephone interfaces | RJ11 and RJ21 50-pin Telco Connectors |
Ports | 32 FXS ports |
Network interfaces | 1 x 10/100BASE-T Ethernet |
Indicators | Port status and activity LEDs |
Media processing | |
Protocol | SIP (RFC3261), IAX2 |
Transport | UDP, TCP, TLS, SRTP |
Codec | G.711 (alaw/ulaw), G.722, G.723, G.726, G.729A/B, GSM, ADPCM |
Voice capabilities | ITU-T G.168 LEC Echo cancellation, dynamic jitter buffer, VAD, CNG, PLC |
DTMF mode | RFC2833, SIP Info, In-band |
Fax | T.38 and Pass-through |
QoS | DiffServ, ToS, 802.1 P/Q VLAN tagging |
Telephony functions | |
Call handling | 3-way conference, attended and blind transfer, call transfer, caller ID display, call waiting, CDR, direct call to caller ID, distinctive ringing, do not disturb, flexible dial plan, hunt groups, hotline, MWI, speed dial |
Security / IP services | |
Firewall | Built-in Firewall, IP blacklist, attack warning |
Network | DHCP, DDNS, OpenVPN, Static Routing, VLAN |
Nat Traversal | Static NAT, STUN |
Network protocol | FTP, TFTP, HTTP, HTTPS, SSH |
Management | |
Protocols | SNMP, RADIUS, TR-069 |
Configuration | Remote Management, Packet Capture, System Logs, Voice Menu for FXS Gateways Basic Configuration, API |
Provisioning | Web GUI, Auto Provisioning, Backup and Restore, Firmware Upgrade by HTTP/TFTP |
Connectivity | |
Signalling | FXS Loop Start, FXS Kewl Start |
Disconnection methods | Busy signal, polarity reversal |
Caller identification | BELL202, ETSI (V23), NTT (V23-Japan) and DTMF-based CID |
Physical properties | |
Short and long distances | 3REN, up to 1.5 km on 24 AWG wire |
Power supply | AC 100-240V (12V 5A) |
Operating temperature | 0°C to 45°C 32°F to 113°F |
Dimensions | 440 mm × 250 mm × 44 mm |
Humidity | 10-90% non-condensing |
Storage temperature | -20°C to 65°C -4°F to 149°F |
Mounting | Desk mounting Rack-mounting |
Compatibility | |
Softswitch and IP-PBX | Works with a wide range of IPPBX and softswitches BroadSoft certified |
Yeastar TA3200 - 1 pc.
2. rack mounting - 2 pieces.
3. screws - 8 pcs.
4. grounding nut - 1 pc.
Rubber feet - 4 units. 6.
Power cable - 1 piece. 7.
Network cable (patch cord) - 1 item. 8.
8. warranty card - 1 item. 9.
9. assembly manual - 1 pc.
10. quick start guide - 1 pc.