Yeastar TA800 | VoIP Gateway | 8x FXS ports
CODE: TA800
Contact
Account
Favorite
Cart
Yeastar TA800 is an eight-port FXS gateway whose main feature is support for two most popular VoIP protocols - SIP and IAX2. The former can be used to locally connect conventional phones to an IP-PBX, the latter can be used to register devices over the Internet (as IAX2 provides improved NAT traversal and requires less traffic when making multiple calls simultaneously).
Yeastar TA800 can also be used to connect your existing traditional PBX to a VoIP provider. In this way, you can get very high savings on mobile, long distance and international calls.
Other features of the FXS gateway include one network port for LAN connection, support for all necessary voice codecs, and an easy-to-use browser-based configuration interface.
| Basic general data | |
| Manufacturer | Yeastar |
| Model | TA800 |
| Type | VoIP gateway |
| Interfaces | |
| Ports | 8 FXS ports |
| Telephone interfaces | RJ11 |
| Network interfaces | 1 x 10/100BASE-T Ethernet |
| Indicators | Port status and activity LEDs |
| Media processing | |
| Protocol | SIP (RFC3261), IAX2 |
| Transport | UDP, TCP, TLS, SRTP |
| Codec | G.711 (alaw/ulaw), G.722, G.723, G.726, G.729A/B, GSM, ADPCM |
| Voice capabilities | ITU-T G.168 LEC Echo cancellation, dynamic jitter buffer, VAD, CNG, PLC |
| DTMF mode | RFC2833, SIP Info, In-band |
| Fax | T.38 and Pass-through |
| QoS | DiffServ, ToS, 802.1 P/Q VLAN tagging |
| Telephony functions | |
| Call handling | 3-way conference, attended and blind transfer, call transfer, caller ID display, call waiting, CDR, direct call to caller ID, distinctive ringing, do not disturb, flexible dial plan, hunt groups, hotline, MWI, speed dial |
| Security / IP services | |
| Firewall | Built-in Firewall, IP blacklist, attack warning |
| Network | DHCP, DDNS, OpenVPN, Static Routing, VLAN |
| Nat Traversal | Static NAT, STUN |
| Network protocol | FTP, TFTP, HTTP, HTTPS, SSH |
| Management | |
| Protocols | RADIUS, TR-069 |
| Provisioning | Web GUI, Auto Provisioning, Backup and Restore, Firmware Upgrade by HTTP/TFTP |
| Configuration | Remote Management, Packet Capture, System Logs, Voice Menu for FXS Gateways Basic Configuration, API |
| Connectivity | |
| Signalling | FXS Loop Start, FXS Kewl Start |
| Caller identification | BELL202, ETSI (V23), NTT (V23-Japan) and DTMF-based CID |
| Disconnection methods | Busy signal, polarity reversal |
| Short and long distances | 3REN, up to 1.5 km on 24 AWG wire |
| Physical properties | |
| Power supply | 12V 1A |
| Dimensions | 200 mm × 137 mm × 25 mm |
| Operating temperature | 0°C to 40°C 32°F to 104°F |
| Storage temperature | -20°C to 65°C -4°F to 149°F |
| Humidity | 10-90% non-condensing |
| Mounting | Desk mounting Wall mounting |
| Compatibility | |
| Softswitch and IP-PBX | Works with a wide range of IPPBX and softswitches BroadSoft certified |
1) Yeast-raiser TA800 - 1pc.
2) Stand - 1pc.
3 Power supply - 1pc.
4) Network cable (patchcord) - 1 pc.
5. warranty card - 1 item. 6.
6 Assembly instruction - 1pc.
7 Short operating manual - 1 pc.
