EN
The Multy U device allows you to build a powerful wireless network over an area of 557 square meters, which will provide WiFi coverage throughout the house and support up to 128 devices without any delay in data transmission.
Other dual-band competing WiFi systems reduce speed with more devices. Wireless network system Multy U uses a single band to communicate with other Multy U devices, so it can handle more devices without sacrificing quality or transmission speed.
A WiFi network based on a grid architecture helps to organize uniform signal sending. No matter how you place the Zyxel Multy U WiFi, it automatically connects to the device that has the best connectivity, even if one of the Multy U devices disconnects.
This product supports Ethernet, allowing each of these devices to be connected via an Internet cable, ensuring reliability and performance.
Multy U is a stylish WiFi system that uses LED to inform about the status of the network system. You can check the status of your system with an extremely original light indicator.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Maximum wireless transmission speed | 2100 Mb/s |
Number of LAN ports | 2x 10/100/1000BaseTX (RJ45) |
Operating frequency | Tri band (2.4GHz, 2x 5GHz) |
Wireless network standards | IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, |
2.4 GHz | Yes |
5 GHz | Yes |
AC adapter included | Yes |
AC input voltage | 12 |
Antenna features | Integrated antenna |
Antenna gain | Under 10dbi |
Antenna type | Integrated |
Antennas quantity | 6 |
Application | Indoor |
Auto MDI/MDI-X | Yes |
Built-in processor | Yes |
Cables included | LAN (RJ-45) |
Certification | Safety: CE-LVD, BSMI EMC: CE, FCC, BSMI, NCC |
DC-in jack | Yes |
Depth | 123 |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Flash memory | 512 |
Height | 30 |
Input current | 1.5 |
Internal | Yes |
Internal memory | 256 |
LED indicators | Status |
Maximum data transfer rate | 866 |
Maximum data transfer rate (5 GHz) | 866 |
MIMO | Yes |
MIMO type | Multi User MIMO |
Networking standards | IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n |
Number of products included | 1 |
Numbers of pieces in the package | 1-pack |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Placement | Hand, Table |
Power consumption (typical) | 14 |
Product colour | White |
Reset button | Yes |
Storage relative humidity (H-H) | 10 - 95 |
Storage temperature (T-T) | -30 - 70 |
Type of device power supply | Power supply |
WAN connection | Ethernet (RJ-45) |
Weight | 310 |
Width | 123 |
Basic technical parameters | |
Wireless network standard | IEEE 802.11 b/g/n 2.4 GHz IEEE 802.11 a/n/ac Wave 2.5 GHz |
Wireless transfer rate | 866 Mbps at 5 GHz 300 Mbps at 2.4 GHz |
CPU | 1 GHz Dual-Core |
Memory RAM | 256 MB |
Flash Memory | 512 MB |
WAN | One 10/100/1000 Mbps Ethernet port RJ-45 with automatic MDI/MDIX |
LAN | One 10/100/1000 Mbps Ethernet port RJ-45 with automatic MDI/MDIX |
Bluetooth | BLE 4.1 |
Buttons | LED On/Off Reset |
Power consumption | 14 W |
Dimensions | 123 × 123 × 30 mm (4.8″ × 4.8″ × 1.2″) |
Weight | 310 g |
Without switch:
Step 1. Please configure the Multy U WiFi system (WSR30) via wireless backhaul access.
Step 2. Connect the Ethernet cable with the LAN port of the main node and the WAN port of the extension node.
With a switch:
In a scenario (with switch), this switch will only be used for Ethernet backhaul communication.
If any client device connects to this switch, it will not be able to access the Internet.
Step 1. Please configure the Multy U (WSR30) WiFi system through a wireless backhaul.
Step 2. Disable the switch.
WiFi supports 64 radio devices. Multy U has 2 radios 2.4GHz and 5GHz. Therefore 128 is the maximum number of wireless connections.
The maximum number of devices for Multy U is 6.