Zyxel WRE6606 | Range extender | AC1300 Dual Band, 1x RJ45 1000Mb/s

CODE: BATZYXWRE6606 / EAN: 4718937591633

Zyxel WRE6606 | Range extender | AC1300 Dual Band, 1x RJ45 1000Mb/s

CODE: BATZYXWRE6606 / EAN: 4718937591633
41,66 EUR without VAT (net)
Out of stock
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: Dual Band (2.4GHz, 5GHz)
Wireless network standards: IEEE 802.11nIEEE 802.11gIEEE 802.11bIEEE 802.11ac
Antenna type: Internal
Show more parameters
Recommended products
Subscribe to the NEWSLETTER and receive 5EUR* for shopping
Save
* Offer valid for orders from 45EUR |Regulation|

Promotions

New products

Discounts

ABOUT PRODUCT

Zyxel WRE6606 - dual-band AC1300 wireless amplifier

The WRE6606 amplifier will perfectly fulfill its role both at home and in the office space. Thanks to MU-MIMO technology, transmission speeds between devices will be much higher than in the case of traditional MIMO networks even with many devices in the network.

wre6606 wireless dual band range extender ac1300

Better coverage

Zyxel WRE6606 will make it possible to extend the range of the Wi-Fi network to cover places where previously the connection quality was not satisfactory.

wre6606 wireless dual band range extender

Modes of operation

The WRE6606 amplifier allows to amplify network coverage in the following ways:

  1. Normal - Signal amplification in the 2.4 GHz and 5 GHz bands.
  2. Range - Amplify the signal only in the 2.4 GHz bands to get a greater network range.
  3. Speed - Amplify signal only at 5 GHz to get full speed.

wre6606 wireless range extender

Easy to set up

Using the switch on the WRE6606 amplifier you can easily switch between: access point (to create a network MU-MIMO), Wi-Fi amplifier (to extend the range of wireless network) and working as a client (to connect cable devices with MU-MIMO capabilities).
The Zyxel ONEapplication will help you copy settings from a Zyxel ONEcompatible router for a seamless roaming connection.

wre6606 range extender

More opportunities

Zyxel WRE6606 will allow you to easily find the best place to install it without having to plug it into the mains each time. This is possible thanks to the micro USB connector, to which you can connect a power supply in the form of a powerbank and thus find a convenient location.
The micro USB connector will also allow you to temporarily extend your Wi-Fi range outside your home and use it in a place without access to the electricity network.

SPECIFICATION

Features / filters
Number of LAN ports 1x 10/100/1000BaseTX (RJ45)
Operating frequency Dual Band (2.4GHz, 5GHz)
Wireless network standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.11ac,
Antenna type Internal
Auto MDI/MDI-X Yes
Automatic channel selection Yes
Cables included LAN (RJ-45)
Certification CE, FCC
Depth 75
Ethernet LAN Yes
Ethernet LAN (RJ-45) ports 1
Ethernet LAN data rates 10,100,1000
Frequency range 2.4 - 5
Height 66.1
Input current 1
LED indicators Yes
Operating relative humidity (H-H) 10 - 90
Operating temperature (T-T) 0 - 40
Output current 2.1
Output voltage 12
Package depth 126
Package height 111
Package weight 449.2
Package width 182
Product colour White
Quick installation guide Yes
Reset button Yes
Safety CE-LVD
Security algorithms 64-bit WEP,128-bit WEP,WPA-PSK,WPA2-PSK
Storage relative humidity (H-H) 10 - 95
Storage temperature (T-T) -30 - 70
USB ports quantity 1
Weight 212.6
Width 123.2

System specification
Wi-Fi standards 802.11 a/b/g/n/ac
Transmission speed Sending:
-2.4 GHz: 400 Mb/s
-5 GHz: 867 Mb/s

Pick up:
-2.4 GHz: 400 Mb/s
-5 GHz: 867 Mb/s
Wireless security 64/128 bit WEP, WPA-PSK/WPA2-PSK
WLAN features Access point/relay/client mode
Wi-Fi Protection Setup (WPS)
Wi-Fi Multimedia (WMM)
Wireless network operation time management
Wireless power output management
Automatic channel selection
Hardware specification
LAN 1 x 10/100/1000 Mb/s Ethernet RJ-45 port with automatic MDI/MDIX support
LEDs indicating Power supply
2.4 GHz wireless signal strength
5 GHz wireless signal strength
Ethernet
WPS
Buttons Operating mode switch Access point/Customer/Relay
WPS/Reset button
Power supply 100-240 V AC, 50/60 Hz
5 V/2.1 A micro USB DC
Physical specification
Dimensions of the device 123.2 x 75 x 66.1 mm (4.85 x 2.95 x 2.60")
Packaging dimensions 182 x 126 x 111 mm (7.17 x 4.96 x 4.37")
Weight 212.6 g (0.47 lb)
449.2 g (0.99 lb) in packaging
Package contents Wireless range amplifier
Ethernet cable
Quick start guide with warranty card
Environmental specification
Working conditions Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: 10% to 90% (non-condensing)
Storage conditions Temperature: -30°C to 70°C (-22°F to 158°F)
Humidity: 10% to 95% (non-condensing)
Certificates
Security CE LVD
EMC CE, FCC

SUPPORT

Product registration on the manufacturer's website

Manufacturer's presentation

Downloads:

Operating instructions Download

FAQ

What does a Wi-Fi amplifier give?

Thanks to the Zyxel WRE6606 amplifier, you will be able to increase the range of your wireless network so that you can use it in a place far away from its source without losing quality.

How do I connect a Wi-Fi amplifier?

The Wi-Fi WRE6606 amplifier should be connected to any power outlet, but it is worth to pay attention to the suggestions of the connection quality indicator and adjust the place of its connection.

41,66 EUR without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.