EN
Ubiquiti UF-GP-C+ is a single-mode GPON cartridge dedicated for Ubiquiti OLT terminals. The SFP GPON optical module transmits data using single-mode fibers over a distance of up to 20 km. Wavelengths are 1310 nm and 1490 nm and the optical power range is 3 to 7 dBm. SFP UF-GP-C+ inserts are equipped with SC/UPC connectors. Data is sent at 1.25 Gb/s and downloaded at 2.5 Gb/s.
Features / filters | |
Output connector | SC |
SFP module - port speed | 1,25 Gbps |
Transmission distance | 4-20km |
Fiber optic connector | SC |
Fiber ports quantity | 1 |
Fiber type | SM (Single-Mode) |
Harmonized System (HS) code | 85369010 |
Interface type | SFP |
Maximum data transfer rate | 2500 |
Number of products included | 1 |
Product colour | Metallic |
Rx power (max) | -30 |
Rx power (min) | -12 |
Rx wavelength (max) | 1310 |
SFP transceiver type | Fiber optic |
Single-mode fiber (SMF) supported | Yes |
Tx power (max) | 7 |
Tx power (min) | 3 |
Tx wavelength (max) | 1490 |
Type of SFP duplex | Wavy (WDM) |
Wavelength | 1490 nm, 1310 nm, 1490, |
Basic technical parameters | |
Type of module | SFP |
Type of transmission | Single-Mode |
Type of connector | SC/UPC |
Wavelength | Tx: 1490 nm Rx: 1310 nm |
Power range | Tx: 3~7 dBm Rx: -30~-12 dBm |
Capacity | Downstream: 2.5 Gbps Upstream: 1.25 Gbps |
Maximum cable length | 20 km |
SFP UF-GP-C+ optical module is an insert dedicated for Ubiquiti OLT devices, including Passive UF-OLT GPON fiber optic terminal.
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then select the fiber optic cable. Single mode fiber is usually used for longer distances, while multimode fiber is used for shorter distances.