LigoWave APC Propeller 5 | CPE | 5GHz 2x2 MIMO, 1x RJ45 100Mb/s
LigoWave APC Propeller 5 | CPE | 5GHz 2x2 MIMO, 1x RJ45 100Mb/s, 15dBi

LigoWave APC Propeller 5 | CPE | 5GHz 2x2 MIMO, 1x RJ45 100Mb/s, 15dBi

KOD: LIGOWAVE APC PROPELLER 5
290,12  z VAT
BRAK NA MAGAZYNIE
send SPRAWDŹ KOSZT DOSTAWY
sentiment_very_satisfied star_border star_border star_border star_border star_border
Częstotliwość pracy: 5 GHz
Ilość portów LAN: 1x [10/100M (RJ45)]
Standard sieci LAN: Fast Ethernet 10/100Mb/s
Standardy sieci bezprzewodowej: IEEE 802.11aIEEE 802.11n
more POKAŻ WIĘCEJ PARAMETRÓW

The APC Propeller 5 is a new generation wireless device designed for client and small scale base-station applications. It has a unique mechanism to do mechanical antenna parameter shifting and achieve the best performance in different operation modes (patent pending). This product is equipped with a high output power MIMO radio (up to 28 dBm) and 15 dBi dual-polarized antenna which make the device ideal for short to medium range wireless communication. Dual firmware image will allow safe software upgrades. The device will restart using the prior firmware in the event of an upgrade failure.

 

The APC Propeller 5 uses an advanced and feature-rich operating system which supports bridge/router and repeater modes (repeater mode allows the product to operate as an access point and as a station at the same time). Deliberant OS also supports iPoll - proprietary wireless communication technology to increase throughput, packet per second rate and stabilize latency on your network. It has a user-friendly Adobe Flex based GUI with instant reconfiguration without a reboot, includes useful installation tools (site survey, delayed reboot, spectrum analyzer, ping, traceroute) and is compatible with our standalone and cloud based Wireless Network Management System (WNMS) - one of the most advanced management tools on the market.

 

Product/ distance

recomendation

PTMP mode

PTP mode

PTP mode (full capacity)

APC Propeller 5

8 km/ 4.97 mi

13 km/ 8.08 mi

1.5 km/ 0.93 mi

 

Wireless

WLAN standard

IEEE 802.11 a/n, iPoll (proprietary)

Radio mode

MIMO 2x2

Operating modes

Access point (auto WDS), Station, Station WDS, iPoll Access Point, iPoll Station, repeater

Radio frequency band

5.1 – 5.9 GHz (country dependent – FCC 5.745 to 5.825 GHz

Transmit power

Up to 28 dBm (country dependent)

Receive sensitivity

Varying between -96 and -78 dBm depending on modulation

Channel size

20, 40 MHz

Modulation schemes

802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)

Data rates

802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps

802.11 a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps

Error correction

FEC, Selective ARQ

Duplexing scheme

Time division duplex

Antenna

Type

Integrated directional dual-polarized panel

Gain

15 dBi

Wired

Interface

10/100 Base-T, RJ45, USB

Networking

Operating modes

Bridge, Router

WAN

Static IP, DHCP client, PPPoE client

NAT

Routing w/ or w/o NAT

Static routing

Supported

DHCP

Client, Server, Relay

Port forwarding

Supported

VLAN

Supported for management and data

Wireless security

WEP, WPA/WPA2 Personal, WPA/WPA2 Enterprise, WMM, WACL

User isolation

Supported

 

Softwave

General

Ability to define/limit frequency, channel width, EIRP, modulation

Advanced wireless

functionality

ATPC (automatic transmit power control), auto-channel, auto-modulation

Operating mode

Router, Bridge

Wireless operating modes

AP auto WDS, Station, Station WDS, Virtual radios (VSSID), iPoll access point, iPoll client, repeater

Wireless security

WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, User isolation, UAM (web portal authentication)

Wireless QoS

WMM

WAN protocols

Static IP, DHCP client, PPPoE client

Network

NAT, static routing, firewall, port forwarding, VLAN, traffic shaping

Services

DHCP server, SNMP server, NTP client, Alerts, Remote syslog, Wireless and Ethernet statistics, bandwidth limiting

Management

HTTP(S) GUI, SSH CLI, SNMP read, WNMS, troubleshooting file, reset via reset tool

Tools

Site survey, Link test, Ping, Traceroute, Spectrum analyzer, delayed reboot

Physical

Dimensions

Length 175 mm (6.89 ‘’), width 65 mm (2.56 ‘’), height 29 mm (1.14 ‘’)

Weight

94 g (3.32 oz)

Power supply

12 - 24 VDC passive PoE (18V passive PoE adapter is included in the package

Power source

100 – 240 VAC

Power consumption (max)

5 W

Environmental

Operating temperature

-40°C (-22 F) ~ +65°C (+149 F)

Humidity

0 ~ 90 % (non-condensing)

Management

System configuration

User-friendly web GUI, Command line via SSH, centralized Wireless Network Management System, reset via reset tool

System monitoring

SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap

 

LigoWave PTP distance approximations:

 

Distance

Products

0.5 km

1 km

2 km

3 km

5 km

10 km

25 km

50 km

LigoDLB PROPELLER 5

162

144

118,8

81

59,4

NA

NA

NA

OPINIE O PRODUKCIE

Twoja opinia o produkcie będzie pierwsza.
DODAJ OPINIĘ O PRODUKCIE
LigoWave APC Propeller 5 | CPE | 5GHz 2x2 MIMO, 1x RJ45 100Mb/s, 15dBi
oceń ten produkt w skali od 1 do 5
star_border star_border star_border star_border star_border
Wybierz inny kraj lub region, aby robić zakupy w odpowiadającym Ci języku
Nasza strona korzysta z plików cookies (tzw. "ciasteczek"). Więcej na temat tych plików, a także na temat przetwarzania przez nas Twoich danych osobowych, znajdziesz w naszej Polityce prywatności.
Ulubione