LigoWave Ligo DLB Propeller 5 | CPE | 5GHz 2x2 MIMO, 1x RJ45 10
LigoWave Ligo DLB Propeller 5 | CPE | 5GHz 2x2 MIMO, 1x RJ45 100Mb/s, 15dBi

LigoWave Ligo DLB Propeller 5 | CPE | 5GHz 2x2 MIMO, 1x RJ45 100Mb/s, 15dBi

KOD: LIGOWAVE DLB-PROP 5
294,74 
BRAK NA MAGAZYNIE
send SPRAWDŹ KOSZT DOSTAWY
sentiment_very_satisfied star_border star_border star_border star_border star_border
Częstotliwość pracy: 5 GHz
Ilość portów LAN: 1x [10/100M (RJ45)]
Standard sieci LAN: Fast Ethernet 10/100Mb/s
Standardy sieci bezprzewodowej: IEEE 802.11aIEEE 802.11n
more POKAŻ WIĘCEJ PARAMETRÓW

DLB PROPELLER 5

The DLB Propeller 5 is a new generation wireless device designed for client and small scale base-station applications. It hasa unique mechanism to do mechanical antenna parameter shifting and achieve the best performance in different operating modes (patent pending).

 

This product is equipped with a high output power MIMO radio (up to 28 dBm) and 15 dBi dual-polarized antenna which make the device ideal for short to medium range wireless communication.

Our dual firmware image will allow safe software upgrades. The device will restart using the prior firmware in the event of an upgrade failure.

 

The DLB Propeller 5 uses an advanced and feature-rich operating system which supports bridge/router and repeater modes (repeater mode allows the product to operate as an access point and as a station at the same time). The DLB OS also supports

LigoWave’s iPoll2 (proprietary wireless communication technology) to increase throughput, packet per second rate and stabilize latency on your network. It has a user-friendly HTML 5 based GUI with instant reconfiguration without a reboot, includes useful installation tools (site survey, delayed reboot, spectrum analyzer, ping, traceroute) and is compatible with our standalone and cloud based Wireless Network Management System (WNMS) - one of the most advanced management tools on the market.

 

The DLB Propeller 5 can be rotated to the horizontal orientation for use as a client device. This greatly reduces interference, as the main noise source is on the azimuth. Alignment is easy as only left and right movement of the device is necessary (no need to move it upwards or downwards as the antenna angle on the elevation is wide).

 

 

Wireless

WLAN standard

IEEE 802.11 a/n, iPoll (proprietary)

Radio mode

MIMO 2x2

Radio frequency band

5.150 - 5.850 GHz (FCC 5.150-5.250 & 5.745 - 5.850 GHz)

Transmit power

Up to 28 dBm (country dependent)

Receive sensitivity

Varying between -97 and -75 dBm depending on modulation

Channel size

5,10, 20, 40 MHz

Modulation schemes

802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)

Data rates

802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps

802.11 a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps

Error correction

FEC, Selective ARQ

Duplexing scheme

Time division duplex

Antenna

Type

Integrated directional dual - polarized panel

Gain

15 dBi

Wired

Interface

10/100 Base-T, RJ45

Networking

Operating modes

Bridge, Router

WAN

Static IP, DHCP client, PPPoE client

NAT

Routing w/ or w/o NAT

Static routing

Supported

DHCP

Client, Server, Relay

Port forwarding

Supported

VLAN

Supported for management and data

Wireless security

WEP, WPA/WPA2 Personal, WPA/WPA2 Enterprise, WMM, WACL

User isolation

Supported

 

 

Software 

Wireless operating modes

Access point (auto WDS), access point (iPoll 2), station (WDS, iPoll 2), station (ARP NAT)

Wireless techniques

Smart station polling, smart auto-channel, adaptive auto modulation, automatic transmit power control (ATPC)

Wireless security

WPA/WPA2 personal, WPA/WPA2 enterprise, WACL, user isolation

Wireless QoS

4 queues prioritization on iPoll 2

Network operating modes

Bridge, router iPv4, router IPv6

Network techniques

Routing with and withouth NAT, VLAN

WAN protocols

Static IP, DHCP client, PPPoE client

Services

DHCP server, SNMP server, NTP client, router advertisement daemon, ping watchdog

Management

HTTP(S) GUI, SSH, SNMP read, WNMS, Telnet

Tools

Site survey, link test, ping, traceroute, spectrum analyzer, delayed reboot

Physical

Dimensions

Length 175 mm (6.89 ‘’), width 65 mm (2.56 ‘’), height 29 mm (1.14 ‘’)

Weight

94 g (3.32 oz)

Power supply

12 - 24 VDC passive PoE (24 V passive PoE adapter is included in the package

Power source

100 – 240 VAC via included adapter

Power consumption

4.5 W

Environmental

 

Operating temperature

-40°C (-40 F) ~ +65°C (+149 F)

Humidity

0 ~ 90 % (non-condensing)

Management

 

System monitoring

SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap

Regulatory

Certification

FCC/IC/CE

 

OPINIE O PRODUKCIE

Twoja opinia o produkcie będzie pierwsza.
DODAJ OPINIĘ O PRODUKCIE
LigoWave Ligo DLB Propeller 5 | CPE | 5GHz 2x2 MIMO, 1x RJ45 100Mb/s, 15dBi
oceń ten produkt w skali od 1 do 5
star_border star_border star_border star_border star_border
Wybierz inny kraj lub region, aby robić zakupy w odpowiadającym Ci języku
Nasza strona korzysta z plików cookies (tzw. "ciasteczek"). Więcej na temat tych plików, a także na temat przetwarzania przez nas Twoich danych osobowych, znajdziesz w naszej Polityce prywatności.
Ulubione