LigoWave NFT 1N | Punkt dostępowy | 2,4GHz 2x2 MIMO, 3x RJ45 10
LigoWave NFT 1N | Punkt dostępowy | 2,4GHz 2x2 MIMO, 3x RJ45 100Mb/s

LigoWave NFT 1N | Punkt dostępowy | 2,4GHz 2x2 MIMO, 3x RJ45 100Mb/s

KOD: LIGOWAVE NFT 1N
315,79 
BRAK NA MAGAZYNIE
send SPRAWDŹ KOSZT DOSTAWY
sentiment_very_satisfied star_border star_border star_border star_border star_border
Częstotliwość pracy: 2.4 GHz
Ilość portów LAN: 3x [10/100M (RJ45)]
Ilość portów WAN: Nie dotyczy
Standard sieci LAN: Fast Ethernet 10/100Mb/s
more POKAŻ WIĘCEJ PARAMETRÓW

Overview:

 

The NFT 1N/ 1N AF are indoor WI-FI access points based on 802.11N technology with integrated 2.4 GHz (2x2) MiMo radios boasting an output power of 28 dBm. 3 Ethernet ports allow connecting multiple devices to the access point. The NFT 1N model is powered with a 12-24V passive PoE adapter and the NFT 1N AF model supports the 802.3af standard, which allows powering the device using a PoE switch.

 

Features:

 

- Responsive HTML 5 based GUI
- 128 concurrent clients
- 8 virtual networks (SSID+VLAN)
- IPv6 support
- WNMS compatible

 

Specifications:

 

Wireless

WLAN standard

IEEE 802.11 b/g/n

Radio mode

MIMO 2x2

Operating mode

Access point, repeater

Radio frequency band

2.402 - 2.484 GHz (country dependent)

FCC 2.412 - 2.462 GHz (CH1-CH11)

Transmit power

2.4 GHz: 28 dBm @ MCS0 (FCC Max certified TX power: 28 dBm)

Channel size

20, 40 MHz

Modulation schemes

802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)

802.11 b: DSS (CCK, DQPSK, DBPSK)

Data rates

802.11 n @ 40 MHz: 300, 270, 240, 180, 120, 90, 60, 30 Mbps

802.11 g @ 20 MHz: 54, 48, 36, 24, 18, 12, 9, 6 Mbps

802.11 b @ 20 MHz: 11, 5.5, 2, 1 Mbps

Duplexing scheme

Time division duplex

Wireless security

WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, Hotspot (UAM)

Antenna

Type

2 x internal omni-directional antennas

Gain

3 dBi

Coverage radius

100 meters (328 ft)

Wired

Interface

3 x 10/100 Base-T, RJ45

Networking

Operating mode

Bridge, router IPv4 and IPv6

Management IPv4

Static, dynamic

Management IPv6

Static, dynamic stateless, dynamic stateful

Secondary IPv4

Supported

VLAN

802.1Q for management and data

Virtual SSID

8 per each radio

Client isolation

Supported

Services

Services

SNMP server, NTP client, WNMS client

Power

Power method

NFT 1N: 12-24 VDC passive PoE; additional 12-24V DC input

NFT 1N AF: 802.3af with passive PoE (48V) support;

additional 48V DC input

Power supply

NFT 1N: 100 - 240 VAC to 12-24V VDC passive PoE (inlcuded)

NFT 1N AF:100 – 240 VAC to 48 VDC 802.3af PoE (not included)

Power consumption (max)

6.24 W

Management

System monitoring

SNMP v1, wyslog

Physical

Dimensions

153 mm (6.1‘’), 147 mm (5.8 ‘’), 29 mm (1.14 ‘’)

Weight

188 g (6.63 oz)

Mounting

Suspended ceiling mount, wall/ceiling mount, pole mount

Environmental

Operating temperature

-10°C (14 F) ~ +55°C (+131 F)

Humidity

0 ~ 90 % (non-condensing)

Regulatory

Certification

FCC/IC/CE

OPINIE O PRODUKCIE

Twoja opinia o produkcie będzie pierwsza.
DODAJ OPINIĘ O PRODUKCIE
LigoWave NFT 1N | Punkt dostępowy | 2,4GHz 2x2 MIMO, 3x RJ45 100Mb/s
oceń ten produkt w skali od 1 do 5
star_border star_border star_border star_border star_border
Wybierz inny kraj lub region, aby robić zakupy w odpowiadającym Ci języku
Nasza strona korzysta z plików cookies (tzw. "ciasteczek"). Więcej na temat tych plików, a także na temat przetwarzania przez nas Twoich danych osobowych, znajdziesz w naszej Polityce prywatności.
Ulubione