Cambium EPMP 3000 EU | Access point | 5GHz 4x4 MU-MIMO, RJ45 10
British (UK) / GBP / Prices without VAT
Cambium EPMP 3000 EU | Access point | 5GHz 4x4 MU-MIMO, RJ45 1000Mb/s

Cambium EPMP 3000 EU | Access point | 5GHz 4x4 MU-MIMO, RJ45 1000Mb/s

CODE: C050910A203A
534,64 GBP without VAT
Added to cart
-
+
PCS
AVAILABILITY:
local_shipping SHIPPING: 24h
Maximum wireless transmission speed: 1200 Mb/s
Number of LAN ports: 1x [100/1000M (RJ45)]
Operating frequency: 5 GHz
more SHOW MORE PARAMETERS

ABOUT PRODUCT

Third generation MU-MIMO 4x4 access point with high packet throughput

Cambium Networks' ePMP product line sets the standard for high performance, scalability and reliability in harsh interference conditions - all at an attractive price. EPMP 3000 is a third generation access point (AP) that uses ePMP 2000's interference protection mechanisms, but it adds multiple user capabilities through MIMO (MU-MIMO) technology. EPMP 3000 is a MU-MIMO 4X4 access point that can double the bandwidth per sector in the same channel width, serving two clients at the same time. In addition, ePMP 3000 continues to work on interference filtering, introducing "beam steering" technology for uplinked antennas, dynamic interference filtering from adjacent channels, combined with stable system software of the device known from ePMP series. The ePMP 3000 AP system consists of ePMP 3000 AP, sector antenna 4X4, optional antenna for "beam steering" and subscriber stations with 25 dBi and 16 dBi gain. The ePMP 3000 system can boast high throughput of packet transmission, up to 1.2 Gb / s, and support for subscriber modules with peak throughput up to 600 Mb / s.

banner

The key advantages:

  • Frequency reuse: supports GPS synchronization and SM transmission power control to enable frequency reuse.
  • Industry-leading spectral efficiency: the MU-MIMO in the download doubles the capacity of the sector, serving two MIMO users at the same time.
  • Market-leading interference tolerance: Intelligent filtering capability on the receiver side gives ePMP 3000 resistance to strong off-channel interference and on the transmitter side reduces it for better colocation effects.
  • Unparalleled performance and scalability: Thanks to Cambium Networks MAC's performance enhancing protocol and air-fairness technology, the ePMP 3000 can serve up to 120 active subscribers at the same time without performance degradation.
x5

Special features:

  • MU-MIMO support with a maximum throughput of 1.2 Gb / s
  • Support 256QAM-5/6, 80 MHz
  • It supports a wide frequency range: 4910-5970 MHz
  • Interface 100 / 1000BaseT compatible with 802.3at
  • Re-use of frequencies with GPS synchronization, mitigation of interference with the beam control antenna and dynamic filtering
throughput

SPECIFICATION

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Maximum wireless transmission speed 1200 Mb/s
Number of LAN ports 1x [100/1000M (RJ45)]
Operating frequency 5 GHz
Antenna gain Not applicable
Device type Access point, Base station, Radioline,
MIMO Type MU-MIMO 4x4
Region / power Cable EU/EU
Type of device power supply PoE 802.3af/at
Working temperature -30°C to +55°C

Technical Specification

The band
Model / part number The full table of models and part numbers can be found in the table below
Frequency range 4910-5980 MHz (exact frequencies permitted by local regulations)
Channel width 20 | 40 | 80 MHz
Channel spacing Configurable in 5 MHz steps
Interface
MAC layer (Media Access Control) Ownership of Cambium
Physical layer 4X4 MUMIMO / OFDM
Ethernet interface 100 / 1000BaseT, automatically negotiated speed, 802.3at compliant, Aux port SFP
Supported power supply methods 56 V PoE (included), standard 802.3at PoE or CMM5 power supply with 56 V and 5 pin to 7 pin adapter
Protocols used IPv4 / IPV6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping
Network management HTTPs, SNMPv2c, SSH
VLAN 802.1Q with priority 802.1p
Performance
Number of customers per sector Up to 120
ARQ Yes
Nominal reception sensitivity (w / FEC) at 20 MHz channel MCS 0, -92 MCS 8 supported by Wi-Fi -68
Nominal reception sensitivity (w / FEC) at 40 MHz channel MCS0, -89 MCS9, -64
Nominal reception sensitivity (w / FEC) at 80 MHz channel MCS0, -86, MCS9 - 61
Modulation levels (adaptive) MCS0 (BPSK) to MCS 9 (256 QAM 5/6)
GPS synchronization Yes, via internal GPS or Cambium Sync (the internal GPS receiver also includes an antenna )
QOS Three-level (voice, high, low) with packet classification by DSCP, COS, VLAN ID, IP and MAC address
DSO Dynamic spectrum optimization. Possibility to change channels based on the detection of interference on the current channel
Fast DFS Changes to a free radar channel with an alternative background availability check
Link
Antenna Sectoral antenna available (C050910D301A)
Transmission power range 0 to +32 dBm (total, up to regional EIRP limit) (step2 dB)
Physical Features
Sectoral antenna connection 4 x 50 ohms, RP (reverse polarity) SMA
Combination of beam-forming antenna 2 x 50 ohms, RP (reverse polarity) SMA, DC (power antenna)
GPS antenna connection 1 x 50 ohms, RP (reverse polarity) SMA
Surge suppression Integrated 1 joule. C00000000L033A - Gigabit 56V surge suppressor is recommended for optimal surge protection
leakage class IP55
Temperature From -30 ° C to + 55 ° C (from -22 ° F to + 131 ° F)
Energy consumption 25 W Maximum 1
Input voltage 44 V to 59 V.
Weight 0.7 kg (1.5 lbs) without supports
Dimensions (L x W x H) 22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 inch) without supports
Other
Encryption 128 bit AES (CCMP mode)
Certified documents
FCC Identifier Z8H-89FT0024**

Industrial Certificate 109W-0024**
Available Device Versions
C058910A102A ePMP 3000 5 GHz Access Point Radio (FCC) (US cord)
C050910A104A ePMP 3000 5 GHz Access Point Radio (IC) (Canada/US cord)
C050910A203A ePMP 3000 5 GHz Access Point Radio (EU) (EU cord)
C050910A303A ePMP 3000 5 GHz Access Point Radio (EU) (UK cord)
C050910A001A ePMP 3000 5 GHz Access Point Radio (ROW) (no cord)
C050910A101A ePMP 3000 5 GHz Access Point Radio (ROW) (US cord)
C050910A201A ePMP 3000 5 GHz Access Point Radio (ROW) (EU cord)
C050910A301A ePMP 3000 5 GHz Access Point Radio (ROW) (UK cord)
C050910A401A ePMP 3000 5 GHz Access Point Radio (ROW) (India cord)
C050910A402A ePMP 3000 5GHz Access Point Radio (India) (India Cord)
C050910A501A ePMP 3000 5 GHz Access Point Radio (ROW) (China cord)
C050910A601A ePMP 3000 5 GHz Access Point Radio (ROW) (Brazil cord)
C050910A701A ePMP 3000 5 GHz Access Point Radio (ROW) (Argentina cord)
C050910A801A ePMP 3000 5 GHz Access Point Radio (ROW) (ANZ cord)
C050910A901A ePMP 3000 5 GHz Access Point Radio (ROW) (South Africa cord)
C050910AZ01A ePMP 3000 5 GHz Access Point Radio (ROW) (No PSU)
C050910D301A EPMP 4x4 MU-MIMO Sector Antenna (for ePMP3000AP)

SUPPORT

unboxing

Installation

o ePMP 3000

Downloads

Brochure EN - ePMP 3000 Download

FAQ

How many subscribers can ePMP 3000 support?

ePMP 3000 can connect up to 120 subscribers.

What is the coverage area of the new MU-MIMO 4X4 antenna?

The new MU-MIMO 4X4 antenna will provide 90 degree coverage.

Is ePMP 3000 compatible with the ePMP 2000 beam control antenna? ( beam forming antenna )

Yes, you will be able to use the intelligent antenna ePMP 2000 to work with ePMP 3000.

Are there other antenna options available for ePMP 3000?

Cambium MU-MIMO 4X4 is the only antenna that Cambium currently recommends for cooperation with ePMP 3000.

Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
British (UK)
Please select a different country or region to shop in a language that suits you.