Cambium EPMP Force 190 EU | CPE | 5GHz 2x2 MIMO, RJ45 100Mb/s,
British (UK) / GBP / Prices without VAT
Cambium EPMP Force 190 EU | CPE | 5GHz 2x2 MIMO, RJ45 100Mb/s, 22dBi

Cambium EPMP Force 190 EU | CPE | 5GHz 2x2 MIMO, RJ45 100Mb/s, 22dBi

CODE: C050900C083A
72,94 GBP without VAT
Added to cart
local_shipping SHIPPING: 24h
Maximum wireless transmission speed: 200 Mb/s
Number of LAN ports: 1x 10/100BaseTX (RJ45)
Operating frequency: 5 GHz
Antenna gain: 21dBi - 30dBi


ePMP Force 190 Cambium Networks

The Cambium ePMP Force 190 is a client device. It is an antenna that performs superbly in a noisy environment. Cambium Networks ePMP Force 190 definitely stands out from the competition with its radio transmitter power and narrow transmission beam, as these are the key advantages in environments with high signal density by other Wi-Fi networks. Devices with wide antenna propagation are characterized by easy visualization, but their wide, non-selective antennas receive not only dedicated signal, but also all others, which unfortunately increases the noise level and lowers the possible connection speed. Only the use of antennas with a narrow beam width allows, on the one hand, for accurate sending of the focused signal in the given direction, on the other hand minimizes the presence of foreign signals in the transceiver head, which results in higher connection speed.

Features Cambium ePMP Force 190 5 GHz

  • Low logistics costs due to compact packaging
  • Adapted for high interference environments with speeds up to 200 Mbps in both directions
  • Large operating range with high gain antenna and 27 dBm transmission power
  • QoS management for high quality triple play services (VoIP, video and data) through three levels of traffic prioritization
  • Configurable operating modes for symmetric and asymmetric transmission - high performance with minimum delays of 2-3 m/s
  • Platform designed for users creating long-distance links in a narrow, selective band, while providing high profit


Features / filters
Maximum wireless transmission speed 200 Mb/s
Number of LAN ports 1x 10/100BaseTX (RJ45)
Operating frequency 5 GHz
Antenna gain 21dBi - 30dBi
Device type Client device
Horizontal beamwidth 11°
MIMO Type 2x2
Region / power Cable EU/EU
Type of device power supply Passive PoE
Working temperature -30°C to +50°C

Frequency range 4910 - 5970 MHz, 4.9 for ROW versions only
Channel spacing Configurable, in steps of 5 MHz
MAC layer (Media Access Control) Cambium - patented property
Physical layer 2x2 MIMO/OFDM
Channel width 5 | 10 | 20 | 40 MHz
Ethernet interface 10/100 BaseT, compatible with Cambium PoE and standard PoE
Network management IPv4/IPv6, HTTPs, SNMPv2c, SSH, Cambium Networks CnMaestro™
Protocols used IPv4/IPv6 (dual stack), UDP, TCP, ICMP, SNMPv2c, NTP, STP, IGMP, SSH
VLAN 802.1Q with priority 802.1p
Nominal reception sensitivity 20 MHz channel MCS0 = -92 dBm to MCS15 = -68 dBm
Nominal reception sensitivity 40 MHz channel MCS0 = -89 dBm to MCS15 = -65 dBm
Modulation levels (adaptive) MCS0 (BPSK) to MCS15 (64QAM 5/6)
Quality of Service Three-level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP and MAC address, transmission, Broadcast, Multicast
Transmission power range 15 to +27 dBm (according to EIRP regional limits) (step 1 dB)
Antenna reinforcement 22 dBi
Physical characteristics
Surge suppression 1 joule
Leakage standards IP55
Operating temperature range -30°C to 50°C (-22°F to 122°F)
Weight 1.0 kg (2.2 pounds)
Wind resistance 125 km/h (78 mi/h)
Dimensions (width x depth) 35 cm x 28 cm (13.5 x 11.2 inches)
Range of pole diameters 3,8 cm - 6,4 cm (1,5 inch - 2,5 inch)
Energy consumption 8 W maximum, 5 W typical
Input voltage 12 to 30 V
Encryption 128-bitAES (CCMP mode)
FCC Identifier Z8H80FT0031
Industry Canada Cert 109W-0031
CE 5,4 GHz EN 301 893 V2.1.1 5,8 GHz EN 302 502 V2.1.1
Cambium ePMP Force 190 5 GHz antenna specifications
Frequency range 4,910 - 5,970 MHz
Antenna type Parabolic
Antenna gain 22 dBi
3 dB Beamwidth-Azimuth 10-11 degrees
3 dB Beamwidth-Elevation 10-11 degrees


Installation of ePMP Force 190 5 GHz

Configuration of bridge/point to point connection



Product data sheet - ENG version Download


How to reset Cambium ePMP to factory default configuration?

To reset the device to the factory default configuration, press the button for more than ten seconds and then release.

Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.