Cambium EPMP Force 300-25 ROW | CPE | AC WAVE2 5GHz, 2x2 MIMO,
British (UK) / GBP / Prices without VAT
Cambium EPMP Force 300-25 ROW | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45 1000Mb/s, 25dBi

Cambium EPMP Force 300-25 ROW | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45 1000Mb/s, 25dBi

CODE: C050910C201A
116,17 GBP without VAT
Added to cart
local_shipping SHIPPING: 24h
Maximum wireless transmission speed: 500 Mb/s
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: 5 GHz
Wireless network standards: IEEE 802.11ac Wave 2


ePMP Force 300-25 system - provides high antenna gain

The ePMP Force 300-25 operates in the 802.11 ac Wave2 standard and provides a maximum throughput of up to 500 Mbps. The device definitely stands out from the competition with its radio transmitter power and narrow transmission beam. These are its obvious advantages in an environment with high density (noise) of signals from other WiFi networks. Devices with wide antenna propagation are always easy to visualize (set up the antenna), but their wide, non-selective antennas receive not only the signal dedicated to them, but also all the foreign ones, thus increasing the noise level and lowering the possible connection speed. Only the use of antennas with a narrow beam width allows, on the one hand, for precise sending of the concentrated signal in the given direction, and on the other hand, minimizes the presence of foreign signals on the transmitter-receiver head, which results in higher connection speed. Providing reliable connectivity, due to the overflowing R-band, is a challenge for wireless service providers around the world. Free channels have become an increasingly scarce commodity, finding the right equipment to put together a broadband connection in such a noisy space has become essential. The ePMP Force series of devices is the answer to this challenge and is ideal for low and high density environments.



  • ePMP Force 300-25 supports channel widths from 20 MHz to 80 MHz and modulates to 256 QAM.
  • ePMP Force 300-25 offers continuous monitoring of the radio signal spectrum and allows you to change operating parameters without switching off the device.
  • Cambium Networks ePMP Force 300-25 is a device designed to provide customers with the ability to operate in environments with high levels of interference, providing excellent bandwidth - over 500 Mb/ s of actual transfer.
  • ePMP Force 300-25 is easy to install, configure and monitor the device from any place.
  • Configurable adaptive modes of operation provide low latency times of 3-5 ms - for both symmetrical and asymmetrical connections.
  • QoS management guarantees exceptional quality for Triple play services - VoIP, video and data - with three levels of prioritization.
  • Long links are possible thanks to the high gain antenna and high transmitting power of the 27dBm radio.
  • The installation process is facilitated by a universal holder - to be mounted on a pole or facade.
  • This platform is designed for users who want to create high-performance radio connections without disturbing other networks.


Features / filters
Maximum wireless transmission speed 500 Mb/s
Number of LAN ports 1x 10/100/1000BaseTX (RJ45)
Operating frequency 5 GHz
Wireless network standards IEEE 802.11ac Wave 2
Antenna gain 21dBi - 30dBi
Device type Radioline, Client device,
MIMO Type 2x2
Region / power Cable ROW/EU
Type of device power supply PoE 802.3af/at
Working temperature -30°C to +60°C


Technical parameters

Channel spacing In 5 MHz increments
Channel width 20 | 40 | 80 MHz
Frequency range Broadband support 4910 - 5970 MHz (note: permissible frequencies and bands are dictated by national regulations).
Nominal receiving sensitivity (w/ FEC) at 40 MHz channel MCS0 = -85 dBm for MCS9 (256QAM-5/6) = -59 dBm
Nominal receiving sensitivity (w/ FEC) at 20 MHz channel MCS0 = -87 dBm to MCS8 (256QAM-3/ 4) = -63 dBm
Physical characteristics
Transmission power range 0 to +27 dBm (total, up to regional EIRP limit) (step 1 dB)
Nominal reception sensitivity (w / FEC) at 80 MHz channel MCS0 = -82 dBm for MCS9 (256QAM-5/6) = -56 dBm
Modulation levels (adaptive) MCS0 (BPSK) to MCS9 (256QAM-5/6)
Resistance to surges 1 Joule Integrated (C000000L065A - 30 V recommended surge fuse)
Leakage class IP55
Operating temperatures -30° C to + 60° C (-22° F to + 140° F)
Weight 2.4 kg (5.3 pounds)
Wind resistance 180 km/hr (112 mi/hr)
Dimensions (diameter x depth) 47 cm x 31 cm (18.5 inches x 12.2 inches)
Range of mounting pole diameters 6.4 cm - 7.6 cm (2.5 inches - 3 inches)
Energy consumption 12 watts
Input voltage 30 volts
Encryption 128-bit AES (CCMP mode)
FCC Identifier Z8H89FT0017
Industrial certificate 109W-0017
CE EN 301 893 V2.1.1 (5,4 GHz), EN 302 502 V2.1.1 (5,8 GHz)
Part Number device
C050910C203A ePMP Force 300-25 5 GHz High Gain Radio (EU) (power supply with EU plug)
C050910C001A ePMP Force 300-25 5 GHz High Gain Radio (RoW) (without cable)
C050910C201A ePMP Force 300-25 5 GHz High Gain Radio (RoW) (power supply with EU plug)
Antenna specifications
Frequency range 4910 - 5970 MHz
Antenna type Time
Peak yield 25 dBi
3dB horizontal beam width 6-10 degrees
3dB vertical beam width 6-10 degrees
Reverse radiation 25 dB
Cross-polarity 20 dB


Performance test

Configuration process



Quick Start Guide (ENG) Download
Data sheet (ENG) Download
Introduction to the ePMP commandline Download
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.