Netgear's Smart line switches are designed to provide the most important network management features and the best possible performance. With g>gigabit speeds and plug and play connectivity, the GS105PE is a solid addition to your business. Netgear Switches provide the most important network functions such as VLAN, QoS, link aggregation, etc. Smart Switches are the ideal offer for people looking for intelligent network solutions with capabilities that go beyond other brands' switches.
The GS105PE switch is equipped with the QoS, service, thanks to which it can detect different types of data, i.e. voice data and video transmissions. It allows to prioritize network traffic without delay, thanks to which the quality of video conferencing, multimedia transmission is visibly improved.
The Gigabit Smart series is equipped with a function to diagnose the quality of cable connections, giving the possibility to assess the efficiency of network cables. In the event of a connection problem, the diagnostic function is automatically able to deal with the fault, saving time.
- Port mirroring on input/output
- Jumbo frames
- Broadcast storm control
- Cable diagnostics
- Loop detection
- DoS protection
|Number of PoE ports||2|
|PoE budget (Watts)||PoE pass-thru: 20W with AT in, 8W with AF in|
|Power supply||by PoE|
|Maximum energy consumption (Watts)||25W|
|Operating temperature||0° to 50° C|
|Dimensions (S x G x W) mm||158 x 105 x 27|
|Electromagnetic compatibility (A or B)||B|
To reset the switch to the factory settings, locate the "Factory Default" button (not to be confused with the "Reset" button). Then insert an office clip or similar device into the hole marked "Factory Default" and hold for 2 to 3 seconds.
*If you press the Factory Default button too long, some switches go into recovery mode, which means that the LED changes from green to amber. If this happens, turn on the power switch or press the Reset button to reboot.