Netgear's GS110TP-200EUS switch is part of a product line called "Smart".They offer features that significantly improve performance and usability.The "Smart" products are designed for converged networks. Maximum efficiency and ease of management are the main features of the GS110TP-200EUS switch. It is equipped with 10 Gigabit Ethernet ports with PoE. A new feature of the Netgear switches is the Gigabit SFP, ports for high-speed fiber connections. It is an ideal solution for demanding companies. Netgear switches are a combination of functions, performance and value..
The GS110TP-200EUS switch offers solid performance thanks to the 8000 MAC addresses table, 256 VLAN, 480 ACL and non-blocking architecture. The SFP ports used in the GS100TP-EUS200 switch enable setting of optical links of uplink type. The Smart line switches support PoE+ in all PoE models, allowing to add devices with high power requirements such as PTZ cameras to the network.
The switch is equipped with Auto Voice VLAN, function which facilitates the implementation of VoIP services. The ACL Wizard guides you smoothly through the process of configuring access control. The GS110TP-200EUS allows users to schedule on/off times for devices powered by PoE. All Smart switches are also equipped with a Intelligent control center, that makes it easy to manage and monitor multiple switches simultaneously.
The Smart line has been created to be as much as possible responssible, efficient and user-friendly. For this reason, three features have been implemented in Netgear's switches:
- Easily manageable via the Web GUI or Smart Control Center
- Compatibility with all existing devices, thanks to standards-based technology.
- Dual operational system image improves network reliability and availability time
|Energy consumption (Watts)||46|
|Number of VLANs||64|
|Power supply||External 48V/1.25A|
|Energy consumption (Watts)||59.3W (with PoE)|
|Operating temperature||0° to 40° C|
|Dimensions (S x Gx W) mm||236x101.6x27|
|GS100TP-200EUS Datasheet - ENG||Download|
To reset the switch to the factory settings, locate the "Factory Default" button (not to be confused with the "Reset" button). Then insert an office clip or similar device into the hole marked "Factory Default" and hold for 2 to 3 seconds.
*If you press the Factory Default button too long, some switches go into recovery mode, which means that the LED changes from green to amber. If this happens, turn on the power switch or press the Reset button to reboot.