Tenda AC10 offers dual-band Gigabit wireless connectivity, with the latest 802.11ac technology and 5 GHz band, the device provides several times faster wireless transmission than 802.11n standard. With advanced QoS control, this router is perfect for online gaming, streaming HD and IPTV videos. The device uses 1 GHz processor and built-in 128MB of DDR3 memory, which provides the best performance in both 2.4 GHz and 5 GHz bands. The 2.4 GHz band reaches a speed of up to 300 Mbps and the 5 GHz band up to 867 Mbps, supporting total throughput of up to 1167 Mbps.
The AC10 router has been equipped with 4 WAN ports that allow for gigabit data transmission, both in connection with the Internet and the local network. This high data transmission ensures smooth operation with demanding network applications.
Thanks to the antenna system used, Beamforming technology monitors the location of wireless devices in the network and directs the WiFI signal directly to these devices. In addition, it constantly monitors and takes into account the movement of mobile devices, such as mobile phones and tablets. This clever signal distribution specifically amplifies the wireless signal and provides a very stable WiFi connection.
Tenda AC10 uses the latest technology to communicate with MU-MIMO devices , the standard used allows to reduce transmission waiting time for multiple devices at the same time. This is a significant change in comparison with previous wireless standards, where the router could only transmit with one device at a time.
With the Tenda AC10 switch, you can transfer your old PPoE username and passwords from your original router, making installation and configuration quick and easy.
The device has a dedicated Tenda WiFi mobile application on iOS and Andriod, which allows us to quickly and efficiently configure the device from a mobile phone.
|Features / filters|
|LAN standard||Gigabit Ethernet 10/100/1000 Mb/s|
|Maximum wireless transmission speed||867 Mb/s|
|Number of LAN ports||3x 10/100/1000BaseTX (RJ45)|
|Number of WAN ports||1x 10/100/1000BaseTX (RJ45)|
|Operating frequency||Dual Band (2.4GHz, 5GHz)|
|Wireless network standards||IEEE 802.11n, IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g,|
|Antenna gain||21dBi - 30dBi|
|Numbers of pieces in the package||1-pack|
|Standards and protocols||Wireless Standards:IEEE 802.11ac/n/a 5GHz
IEEE 802.11n/g/b 2.4GHz
Wired Standards:IEEE 802.3, IEEE 802.3u
|Frequency||5GHz: Up to 867Mbps
2.4GHz: Up to 300Mbps
|Wireless connection security||WPA-PSK, WPA2-PSK, WPA/WPA2
Wireless Security: Enable/Disable
WPS Fast Encryption
|WAN connection type||Dynamic IP/Static IP/PPPoE
Connection Type Auto Detection
Broadband Account and Password Migration
|Modes of operation||Router/AP/Universal Repeater/WISP|
SSID Broadcast and Hide
Signal Power Adjustment
|DHCP||DHCP Server and Client
DHCP Client List
DHCP Address Reservation
|DDNS||DynDns, NO-IP, Oray.com, 3322.org, 88ip|
|Firewall||Forbid UDP Flood Attack
Forbid TCP Flood Attack
Forbid ICMP Flood Attack
Forbid WAN Ping from Internet
PPTP Pass Through
L2TP Pass Through
IPSec Pass Through
|Functions||Smart Wi-Fi Schedule
Smart Power Saving
Smart LED On/Off
MAC Address Filter
IP and MAC Address Binding
Online Upgrade System
AC10 has factory default settings, connect the AC 10 LAN port to the old WAN port of the router before turning on two routers. After the AC10 LAN port and WAN port lights stop blinking and start to light (for 3 seconds), it means that the migration was successful.
The Tenda AC10 supports up to 30 devices, including computers, phones, televisions.