Tenda AP5 | Access point | 2,4GHz, 2x RJ45, PoE 100Mb/s
British (UK) / GBP / Prices without VAT
Tenda AP5 | Access point | 2,4GHz, 2x RJ45, PoE 100Mb/s

Tenda AP5 | Access point | 2,4GHz, 2x RJ45, PoE 100Mb/s

20,84 GBP without VAT
Added to cart
local_shipping SHIPPING: 24h
Maximum wireless transmission speed: 300 Mb/s
Number of LAN ports: 2x 10/100BaseTX (RJ45)
Operating frequency: 2.4 GHz


Access Point Tenda AP5

The Tenda AP5 access point is suitable for small and medium businesses as well as for home use. The Access Point supports 5 modes of operation, combining the functions of several devices into one. The device is designed to improve the range of an existing Wi-Fi connection, creating a stronger signal in hard-to-reach places. Three 5 dBi external detachable antennas provide high quality at speeds up to 300 Mbps. The Tenda Ap5 is equipped with the Broadcom chipset, which has a high actual transfer rate and stability, and the chipset also provides a "green Wi-Fi mode" that dynamically turns off the chip components, thus reducing active power consumption.

tenda ap5 access point

The Tenda AP5 provides five modes of operation:

  • Access Point - The Tenda AP5 is connected to your network via an Ethenet cable and transfers your wireless network. It also has 2 LAN ports for switch mode.
  • Universal Repeater - This mode allows you to select the Wi-Fi network to which the AP5 will connect and expand the signal to where it is weak or variable.
  • WISP - In this mode, the AP5 connects to a Wi-Fi network, such as an ISP, separates the provider's network from your network via routing and creates a home Wi-Fi network with its own DHCP server.
  • Client + AP - This mode is very similar to Universal Repeater / Extender mode, in this mode you can also set your own WiFi network, security, password, etc. The device connects to the first WiFi network and creates a second WiFI network, after which both networks and devices communicate directly with each other in one LAN.
  • Station - AP5 connects to the WiFi network and provides connectivity for two LAN ports to connect two other devices via an Ethernet cable.


Press one button to improve Wi-Fi coverage

The AP5 access point is equipped with a "extend range" button, which allows the user to easily extend the range of the existing Wi-Fi network.


High level of safety

In addition to the most powerful WPA2-PSK security , Tenda AP5 also supports many other types of security, VPN, MAC address filtering, the ability to disable network name broadcast, VLAN for each SSID up to 8 different SSIDs with different security, output power settings.

Tenda AP5

Easy to implement

Support for power over Ethernet (PoE) and a special design that allows wall mounting allows the device to be installed in places where there is no power outlet such as garages, warehouses.

tenda AP5 access point


Features / filters
LAN standard Fast Ethernet 10/100Mb/s
Maximum wireless transmission speed 300 Mb/s
Number of LAN ports 2x 10/100BaseTX (RJ45)
Operating frequency 2.4 GHz
Wireless network standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b,
Antenna type Outside
Application Indoor
Numbers of pieces in the package 1-pack
Type of device power supply Passive PoE

Dimensions 148*146.2*31.5 mm
Standards and protocols IEEE 802.11n/g/b
Interface 2*10/100 Mb/s Ethernet port (RJ45)
Antenna 3* detachable 5 dBi omnidirectional antenna (RP-SMA)
Buttons 1*reset
1* Extender
Power supply DC 12 V 1 A passive PoE
Passive PoE power supply Passive PoE up to 40 m (cat5e or higher)
Sensitivity of reception Mode b: 1M -89 dBm@8% 11M -87 dBm@8% PER
mode g: 54M -74 dBm@8% PER
mode n: 72.2M -74 dBm@8% PER
150M -72 dBm@8% PER
LED SYS, WPS, Bridge, WiFi, LAN1, LAN2
Installation Desktop/wall-mounting
Frequency range 2.4 GHz-2.483 GHz
LAN settings Static IP, dynamic IP
Wireless connection speed 11n to 300 Mb/s (dynamic)
11g: up to 54 Mb/s (dynamic)
11b: up to 11 Mb/s (dynamic)
Wireless connection functions 8 SSID
radio on/off
broadcasting of SSID
automatic hiding of the SSID when the customer limit is exceeded
customer limit for SSID
transmission power output
isolation of the access point
RSSI grading for Wi-FI clients
functionality of WMM
APSD functionality
network access control based on MAC address
network client list
Wireless connection security 64/128 JEP
Number of possible users 5
Number of possible Wi-Fi users 20+


The manual: Download


1. What modes does the Tenda AP5 work in?

An access point can work as:

  • Access point
  • Universal Repeater
  • CIS
  • Client+AP
  • +AP station

How do I login to the Tenda AP5 home page?

1. Otwórz przeglądarkę, a następnie wpisz re.tendacn.com w pasku adresu i kliknij Enter.

punkt dostępowy

2. Wpisz nazwę użytkownika i hasło w paskach, a następnie kliknij przycisk Zaloguj, aby zalogować się na stronę ustawień.

Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.