TL-SF1008P is an unmanaged switch with 8 10/100 Mbps ports. The switch does not require configuration. It has 4 PoE (Power over Ethernet) ports. It can automatically detect and power all IEEE 802.3af compliant PDs. This solution allows you to extend the range of the network in places where there is no access to power, and we need to install IP cameras, IP phones, etc.
Preventing congestion and prioritising ports
The switch is equipped with a priority function, thanks to which the system is safe in moments of overload. Power consumption of devices powered via PoE is up to 57 W. Devices that will be connected to higher priority ports will be powered first.
Easy to operate
The TL-SF1008P switch is easy to install and use. No configuration or installation is required. With its reliability and high transmission quality, the 8-port desktop switch TL-SF1008P 10/100, with four PoE ports, is a great solution for expanding your home or office network.
10BASE-T: Cat 3, 4 or 5 UTP cable (up to 100 m) STP EIA/TIA-568 cable 100Ω (up to 100 m) 100BASE-TX: Cat 5 or 5e UTP cable (up to 100 m) STP EIA/TIA-568 cable 100Ω (up to 100 m)
Maximum (PoE on): 65 W (220 V/50 Hz) Maximum (PoE off): 2.9 W (220 V/50 Hz)
External power supply (output: 48 V DC /1.25 A)
PoE ports (RJ45)
Standard: 802.3 af PoE ports: ports 1 to 4 Total PoE power: 57 W
MAC address plate
Dimensions (S x G x W)
171 x 98 x 27 mm (6.7 x 3.9 x 1.1 inch)
Max. energy consumption
2.66 (220/50 Hz no PD connected) 65.92 (220/50 Hz with 57 W PD connected)
Amount of heat generated
9.08 BTU/h (no PD connected) 224.92 BTU/h (with 57 W PD connected)
Method of transmission
Compatible with IEEE 802.3af IEEE 802.3af PoE-powered (PD) devices Prioritisation of ports Automatic storage and fading of Mac addresses Supports IEEE802.3x bandwidth control for full duplex and backpressure for half duplex
FCC, CE, RoHS
TL-SF1008P, power supply, manual
up to 2.3 W (without connected PD devices) up to 59.3 W (up to 57 W for connected PoE devices)