Thanks to its mesh reflector and single-pole narrowband design, the airGrid®M client device is the ideal solution for applications requiring low-cost and lightweight CPEs.
The airGrid®M has been designed as a high-precision CPE device and works within a range of 50+ km.
Maximizing radio performance in Ubiquiti products is possible by combining both radio and radio in one device.
Ubiquiti's airMAX® technology has been tested in millions of case studies around the world, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
Ubiquiti's universal airOS® software technology provides a powerful, multi-point external network with features such as wireless network settings, bridge or routing configuration and system management services.
airGrid®M does not require any special tools for assembly, only one screw is needed.
|Basic technical parameters|
|Dimensions||620 × 460 × 360 mm|
|Network interface||(1) 10/100 Ethernet port|
|Case||Outer, UV-stabilized, plastic|
|Frequency||5725 - 5850 MHz|
|Output power||25 dBm|
|Maximum electricity consumption||3 W|
|Power supply||24 V, 0.5 A PoE power supply (included)|
|Power supply method||Passive PoE (pairs 4, 5+; 7, 8 return)|
|Max. VSWR||1.5 : 1|
|Wind power, survival||200 km/h|
|Wind load||34,7 N @ 200 km/h|
|Specification||ETSI EN 302 326 DN2|
|Shocks and vibrations||ETSI300-019-1.4|
|Certificates||FCC, IC, CE|
|Operating temperature||-30°C to 75° C|
|Working humidity||5% to 95%|
Connect the Ethernet cable from the device to the PoE.
2 adapter port. Connect the Ethernet cable from the LAN to the adapter port.
3. Connect the power cord to the power port.
Plug the other end of the power cord into a power outlet.