Ubiquiti PBE-5AC-500-ISO | CPE | PowerBeam, 5GHz, 1x RJ45 1000M
British (UK) / USD / Prices without VAT
Ubiquiti PBE-5AC-500-ISO | CPE | PowerBeam, 5GHz, 1x RJ45 1000Mb/s, 27dBi

Ubiquiti PBE-5AC-500-ISO | CPE | PowerBeam, 5GHz, 1x RJ45 1000Mb/s, 27dBi

CODE: PBE-5AC-500-ISO-EU / EAN: 810354023613
158,01 USD without VAT
OUT OF STOCK
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: 5 GHz
Antenna gain: 21dBi - 30dBi
more SHOW MORE PARAMETERS

ABOUT PRODUCT

A breakthrough in performance

airMAX® ac products offer improved latency, noise immunity, scalability and significantly improved performance.

Innovative mechanical design

The integrated separator design improves RF isolation to filter out spatial interference and the metal interior of the back enclosure enhances radio frequency shielding.

ubiquiti rf PBE-5AC-500-ISO POWERBEAM

Excellent signal isolation

The integrated isolator design spatially filters out interference, so that PowerBeam ac ISO provides better signal quality. Both graphs near the field are displayed in watts and use a linear scale.

ubiquiti powerbeam 5ghz

Excellent data processing

Ubiquiti's airMAX® software with a custom chipset significantly improves TDMA delay and network scalability. The custom processor provides hardware acceleration capabilities for the airMAX schedule to support the high data rate and dense modulation used in airMAX ac technology.

ubiquiti powerbeam 5GHz 27dbi

Advanced software

Ubiquiti's airMAX® technology has been proven in millions of devices worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed multipoint networks.

PBE-5AC-500-ISO POWERBEAM 5GHZ airmax

  • AirMAX ac protocol support
  • Long-range PtP
  • Selectable channel width
  • Automatic channel selection
  • PtP: 10/20/30/40/50/60/80 MHz
  • PtMP: 10/20/30/40 MHz
ubiquiti airos

Radio spectrum analysis

airView allows to identify noise signatures and plan the network in such a way that minimize interference. airView performs the following functions:

  • Constantly monitors interference levels
  • Collects data in real time spectral views
  • Helps optimize channel selection, network design
ubiquiti PBE-5AC-500-ISO POWERBEAM 5GHZ

Breakthrough in data capacity

airMAX ac supports high data transfer rates, whose capacity is as much as 450+ Mbps, require dense modulation: 256QAM has a significant increase over 64QAM, which is used in airMAX.

ubiquiti 450 airmax ac

SPECIFICATION

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Number of LAN ports 1x 10/100/1000BaseTX (RJ45)
Operating frequency 5 GHz
Antenna gain 21dBi - 30dBi
CPU frequency 720 MHz
Device type Client device
RAM memory 128MB
Type of device power supply Passive PoE

Basic technical parameters
Dimensions 564 × 564 × 308 mm
Weight 5.2 kg
Power supply 24 V, 0.5A Gigabit PoE
Power supply Passive PoE (Pairs 4, 5+; 7, 8 Back)
Voltage range 20-26VDC
Maximum power consumption 8W
Frequency of operation 5150 - 5875 MHz
Strengthening 27 dBi
Network interface (1) 10/100/1000 Ethernet port
CPU specification Atheros MIPS 74Kc, 720 MHz
Memory RAM 128 MB DDR2, 16 MB Flash
LED indicators (1) Power
(1) LAN
(4) WLAN
LED signal strength Adjustable at software level to match RSSI levels
Supported bandwidths PtP mode 10/20/30/40/50/60/80 MHz
PtMP mode 10/20/30/40 MHz
Maximum VSWR 1.5:1
Built-in downward tilt mechanism ± 20°
Polarisation Two-line polarization
Case External UV-resistant plastic casing
Installation Columnal (parts included)
Wind resistance 984 N @ 200 km/h
Maximum wind resistance 200 km/h
ESD/EMP protection _± 24 kV, Contact ± 24 kV
Operating temperature -40 to 70° C
Humidity during operation 5 to 95%
Certificates FCC, IC, CE
RoHS compliance Yes
Corrosion resistance test 68-2-11 (ASTHMA B117),
Equivalent: MIL-STD-810 G Method 509.5
Vibration test IEC 68-2-6
Temperature test IEC 68-2-14
UV test IEC 68-2-5 in 40° C (104° F)
The equivalent: ETS 300 019-1-4
Cloud-busting test ETS 300 019-1-4
Equivalent: MIL-STD-810 G Method 506.5

SUPPORT

Software Download
Datasheet Download
Quick start guide Download

FAQ

How to connect the device to a PoE adapter?

1. Podłącz kabel Ethernet z portu Ethernet urządzenia do portu POE adaptera.
2. Podłącz kabel Ethernet z sieci LAN do portu LAN adaptera.
3. Podłącz przewód zasilający do portu zasilania. Podłącz drugi koniec przewodu zasilającego do gniazdka sieciowego.
ubiquiti poe

What is the frequency of operation ?

Operating frequency: 5 GHz

At what temperature can the device work ?

Operating temperature -40 to 70° C

Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
British (UK)
Please select a different country or region to shop in a language that suits you.