Ubiquiti UAP-LR-3 is a set of three access points for creating long-range networks. The signal range is even 183 meters, which is a great advantage of the device. The access points operate in 2.4 GHz band, offering data transmission speeds up to 300 Mbps. They can be easily mounted on the ceiling or wall. Thanks to UAP-LR-3 access points you can easily build a efficient network with long range.
UAP-LR is a model with a longer range than the base UAP model. The device with a range of up to 180 m operates in 802.11n MIMO standard with speed up to 300 Mbps. Installation of the access point is easy thanks to the design suitable for wall or ceiling mounting (all accessories included).
UniFi is a revolutionary Wi-Fi system that stands out for high performance, unlimited scalability and a central controller to manage all devices on the network. Access Unifi LR points are distinguished by their sophisticated design. They can be easily installed with the included mounting kit. The Unifi controller can be accessed via any web browser. Thanks to this powerful tool, it is possible to manage the entire network made up of Unifi devices from one place. The software is very intuitive, no special training is required. Unifi Controller is equipped with a number of functions, such as: coverage map, performance parameters, real-time device status, automatic UAP device detection and advanced security options.
The device is powered by Power over Ethernet (PoE), so one Ethernet cable is sufficient for both power and data transmission. The PoE Gigabit Ethernet power supply is included.
Ubiquiti UAP-LR-3 can also be powered by a 802.3af compatible switch.
With unlimited scalability, building wireless networks has never been so easy. Start with one UAP device and expand your network to as many as a thousand devices, while maintaining one management system.
|Features / filters|
|LAN standard||Fast Ethernet 10/100Mb/s|
|Maximum wireless transmission speed||300 Mb/s|
|Number of LAN ports||1x 10/100BaseTX (RJ45)|
|Number of WAN ports||Not applicable|
|Operating frequency||2.4 GHz|
|Wireless network standards||IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.11a,|
|Antenna gain||Under 10dbi|
|Device type||Access point|
|Management||CLI - Command Line Interface, Dedicated application, By web browser,|
|Numbers of pieces in the package||3-pack|
|Type of case||Plastic|
|Type of device power supply||Passive PoE|
|WiFi encryption||TKIP/AES, WEP, WPA-PSK, WPA/WPA2,|
|Basic technical data|
|Dimensions||20 x 20 x 3.65 cm|
|Weight||290 g with assembly kit|
|Network Interfaces||(1) 10/100 Ethernet port|
|Antenna||2 integrated antennas (supporting 2x2 MIMO)|
|Wi-Fi standards||802.11 a/b/g/n|
|Power supply method||Passive PoE (12-24 V)|
|Power supply||24 V, 0.5 A PoE - adapter included|
|Max. power consumption||6 W|
|Max. power TX||27 dBm|
|BSSID||Up to 4 on the radio|
|Wireless network security||WEP, WPA-PSK, WPA-TKIP, WPA2 AES,802.11i|
|Certificates||CE, FCC, IC|
|Installation||For wall or ceiling mounting (mounting elements included)|
|Ambient temperature during operation||-10°C to 70°C|
|Ambient humidity during operation||5% to 95%, non-condensing|
|Advanced traffic management|
|Advanced QoS||Capacity constraints for each user|
|Guest isolation service||Yes|
|WMM||Voice, Video, Best Effort and Background|
|Supported data rates (Mbps)|
|802.11n||6.5 Mbps to 300 Mbps (MCS0 -MCS15, HT 20/40)|
|802.11b||1, 2, 5.5, 11 Mbps|
|802.11g||6, 9, 12, 18, 24, 36, 48, 54 Mbps|
The operating frequency is 2.4 GHz.
The power type of the device is Passive PoE.
Management types are CLI - Command Line Interface, a dedicated application and via a web browser.