







Equipped with double 10G Ethernet interface for high throughput and a powerful Intel Xeon-D processor, the UniFi application server efficiently scales to support UniFi and UniFi video installations.
The small size 1U and the pre-installed UniFi and UniFi Video software enable fast deployment and plug-and-play integration.
Use the UniFi Mobile application to configure the UniFi application server. The username and password you configure in the UniFi Mobile application will be used in the UniFi and UniFi Video software.
Upload a map of your location or use Google Maps to show the areas where the cameras are located.
Basic technical parameters | |
Dimensions | 442,4 × 43,7 × 305,5 mm |
Weight | 6.5 kg |
Power consumption | 150W maximum (60W typical) |
Power supply method | 100-240VAC/50-60 Hz, universal input |
Power supply | 100-240VAC, 2 to 4A, 50 to 60 Hz |
Range of supported voltages | 100-240VAC |
LEDs | System Data Ports Hard drives |
Processor | Intel Xeon D-1521 |
System memory | 16 GB DDR4 |
Flash storage | M.2 SSD 120 GB |
Hard disk capacity | (1) 8 TB hard drive (pre-installed) |
Operating temperature | 0 to 40° C |
Working humidity | 5 to 90% |
Installation in a rack | 1U High, 12" deep |
Interfaces | Network Interfaces (2) 1/10 Gbps RJ45 Ethernet ports IPMI interface (1) 1 Gb/s Ethernet port RJ45 VGA interface (1) VGA port USB (2) USB 3.0 ports (rear panel) (2) USB 2.0 ports (front panel) Bluetooth Bluetooth 4.0 |
Certificates | CE, FCC, IC |
Użyj aplikacji sieci UniFi Network, aby skonfigurować serwer UniFi.
1. Pobierz aplikację sieci UniFi z App Store lub Google Play.
2. Włącz Bluetooth w telefonie komórkowym.
3. Uruchom aplikację i przytrzymaj urządzenie mobilne w zasięgu 1,5 m od serwera.
4. Kliknij przycisk Dodaj kontroler.
5. Gdy serwer UniFi zostanie wykryty, stuknij przycisk Konfiguracja na urządzeniu.
6. Skonfiguruj ustawienia, a następnie
stuknij przycisk Set UP i przejdź do kroku 8.
7. Skonfiguruj kontroler UniFi, UniFi Video NVR, SSH i/lub poświadczenia IPMI w zależności od potrzeb, a następnie kliknij przycisk Gotowe.
8. Zostaniesz powiadomiony o zapisaniu ustawień. Stuknij przycisk Gotowe.
Power consumption 150W maximum (60W typical)
Hard drive capacity: 8 TB of hard drive (pre-installed)