SINUS PRO UPS 800W 12V 10A | Power supply | 800W
British (UK) / USD / Prices without VAT
SINUS PRO UPS 800W 12V 10A | Power supply | 800W

SINUS PRO UPS 800W 12V 10A | Power supply | 800W

CODE: VOLT SINUS PRO UPS 800W 12V / EAN: 5903111886479
96,73 USD without VAT
OUT OF STOCK
Battery voltage in UPS: 12V
UPS power (VA): 800
UPS - charging current: 10A
more SHOW MORE PARAMETERS

ABOUT PRODUCT

SINUS PRO-800W 12V emergency power supply unit

VOLT SINUS PRO UPS 800W is a computer emergency power supply from the SINUS PRO series, the device combines high-performance pure sine wave DC/AC converters. In case of voltage loss from 230V mains or photovoltaic, the device switches to battery mode, which allows for further operation of the system and protection against irretrievable data loss.


upset diagram

The feature that distinguishes sine fault power supplies from cluster simple AC/DC converters is output voltage generation of a pure sine waveform, identical to that in the power network. The device includes DC/AC pure sine wave, UPS emergency switch, mains voltage stabiliser (AVR), battery charger (charger) and the necessary protection for the operation of the device together with the solar controller and photovoltaic. Thanks to the use of a colour display, the device allows you to monitor the most important operating parameters of the system. The power supply is from a series of emergency power supplies type "line-interactive".

SINUS-PRO-UPS

Device characteristics

  • The functions of DC/AC converter, UPS emergency power supply are included in one device and
    automatic battery charger
  • The toroidal transformer used in the inverter provides high efficiency and low idling current.
  • The device is much more energy efficient than older constructions using transformers with
    with E-cores
  • A fast 32-bit microprocessor ensures accurate and trouble-free operation
  • Intuitive and easy to use thanks to the colour LED display, which informs about the current status
    operation of the device (input and output voltage, battery status, charging, etc.)
  • The converter produces pure sine wave voltage at the output, which makes it possible to work with practically
    any kind of load
  • High-currentcharge of batteries (exact values in the table with technical specifications)
  • Ability to change the charging current with a button and switch off the charger
  • Speed switchover from mains to UPS mode for uninterrupted operation
    connected devices
  • Intelligent cooling fan control, depending on the actual device temperature and
    operating status of the inverter
  • Ac (mains) / SOLAR (battery)
priority switch

Display elements and symbols

display

SPECIFICATION

Features / filters
Battery voltage in UPS 12V
UPS power (VA) 800
UPS - charging current 10A

Technical data
Rated power (continuous) 500 W

Overload power (momentary) 800 VA

Battery voltage / -ów 12 V

Rectifier (charging current) 10 A

PV charging voltage ~ 18V 12 - 25 V

Solar controller None

Automatic mains voltage regulator - AVR 140 - 275 VAC

Idle current (no load) 0,3 A ≤ Idle current ≤ 1,5 A

Permissible supply voltage range Switching to battery power is done when the mains voltage is lower than 160 V (+- 5 V) or higher than 260 V (+- 5 V)

Supply voltage frequency 45 Hz ~ 65 Hz

UPS output voltage frequency 50 Hz (+- 0.5 Hz)

Output voltage range AVR mains voltage regulator: 204 - 240 V, UPS - battery: 230 V (+- 3%)

Overload protection (battery power supply) In the event of an overload of 110 % - 130 %, the power supply is disconnected after 30 seconds. If the overload is more than 130 %, the power supply shall be cut off immediately.

Overload protection (mains supply) The device warns of overload until the fuses are tripped.

Permissible humidity 10 % RH ~ 90 % RH

Permissible operating temperature 0 ~ 40 °C

Dimensions 260 mm x 150 mm x 280 mm

Weight 6 kg

SUPPORT

Youtube:

FAQ

What are SINUS PRO inverters designed for?

SINUS PRO series converters are designed for office and home applications, they should not be used together with special equipment, the failure of which could cause material damage or threaten life (e.g. industrial and medical equipment).

Can the device be overloaded?

Do not overload the device. Operation under load greater than shift load may damage the inverter.

Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
British (UK)
Please select a different country or region to shop in a language that suits you.