The ZTE F401 terminal is a compact solution for FTTH networks. It is a high-end subscriber terminal that will provide excellent performance in any application.
Subscriber terminal ZTE F401 has one Gigabit Ethernet connector which will allow to separate the Internet network into more devices and provide stable access to VoIP, IPTV and Internet applications at the same time.
The batch configuration on the EMS side will make it unnecessary to configure ZTE F401 additionally.
Thanks to the EPON optical interface, the F401 terminal will allow you to feed the signal of a high-speed fiber optic network and achieve a data transfer rate of up to 1.25 Gb/s.
The F401 terminal has been designed in a compact style to take up as little space as possible and look good at the same time. ZTE F401 will also help you save energy by detecting network traffic and if it is reduced it will go into low power mode.
|Supported standards||IEEE 802.3ah
|Network Interfaces||1 x EPON interface (SC / PC)
-Download: 1.25 Gb/s
-Send: 1.25 Gb/s
|User interface||1 x 10/100/1000 Base-T adaptive interface|
|Special features||1 x Optical interface 1000BASE-PX20+
MPCP (Muti-Point Control Protocol)
OAM and extended OAM
DBA (Dynamically Bandwidth Assignment)
Verification by MAC / LOID (Logical ONU Identifier) address
IGMP snooping and controlled multicast
Alarm Dying Gasp
SIP, H.248 and MGCP
G.711 / G.723.1 / G.729A and T.30 / T.38
Local Web Management, Remote TR069 and OAM Management
|Physical parameters||Current consumption: Up to 4W
Power supply: 12 V DC
Operating temperature: From -5°C to 45°C
Humidity: 5% to 95% relative humidity
Dimensions: 130 x 40 x 103 mm
Weight: 0.2 kg
The method of assembly: On the desk / To the wall
Gigabit Ethernet is a standard data rate that is supported by the gigabit Ethernet port on a F401 network device and can be 1000 Mb/s (1 Gb/s).
Yes, in addition to the footer, the ZTE F401 device has holes for hanging the device.