Cambium EPMP Force 300-13 | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45
Cambium EPMP Force 300-13 | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45 1000Mb/s, 13dBi

Cambium EPMP Force 300-13 | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45 1000Mb/s, 13dBi

CODE: C050900C702A
110,42 GBP with VAT
Added to cart
-
+
PCS
AVAILABILITY:
local_shipping SHIPPING: 24h
Maximum wireless transmission speed: 600 Mb/s
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: 5 GHz
more SHOW MORE PARAMETERS

ABOUT PRODUCT

banner

EPMP Force 300-13 - a top-class CPE client device

Wireless service providers and businesses around the world are challenged to provide a stable communication platform in an overcrowded RF environment. Free bandwidth becomes scarce, finding the right broadband solution is essential for all low and high density deployments. Cambium Networks solves this challenge with a technological breakthrough that provides excellent performance, noise immunity and long range of possible connections - even in the most congested environments. The Force 300-13 client device is a combination of the latest 802.1lac Wave 2 technology and field-proven ePMP device performance, enabling transfers of up to 600 Mbps. The ePMP Force 300-13 is a powerful but inexpensive subscriber module built to work with the ePMP3000 access point, which, thanks to its downward compatibility, enables work with the ePMP 2000 AP and is a platform for future migration to 802.1lac Wave 2 technology. The Force 300-13 module has an integrated 13 dBi panel antenna with narrow beam width.

The printsheet

  • Cambium Networks' EPMP Force 300-13 is designed to operate in high interference environments and provides the highest connection quality with up to 600 Mb / s of actual data transfer.
  • EPMP Force 300-13 supports channel widths from 20 MHz to 80 MHz and modulation to 256QAM.
  • EPMP Force 300-13 supports real-time frequency spectrum monitoring without affecting capacity.
  • Configurable operating modes ensure reliable adaptation to both symmetrical and asymmetrical links, while providing high performance and low latency both ways - from 3-5 ms.
  • QoS management offers exceptional service quality for VoIP, video and data content - providing three levels of traffic prioritization.
  • The integrated 13 dBi panel antenna is small in size but provides excellent coverage. Cambium Networks LINKPlanner ™ will help you to plan your network topology, based on field maps.
  • Installation of the device is extremely easy thanks to the included mounting system, which enables wall mounting and pole mounting.

SPECIFICATION

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Maximum wireless transmission speed 600 Mb/s
Number of LAN ports 1x 10/100/1000BaseTX (RJ45)
Operating frequency 5 GHz
Wireless network standards IEEE 802.11ac Wave 2
Antenna gain 11dBi - 20dBi
Device type Client device
Horizontal beamwidth 30°
MIMO Type 2x2
Type of device power supply Passive PoE
Working temperature -30°C to +60°C

The spectrum

Channel spacing Configurable in 5 MHz steps
Antenna specifications
Channel width 20/40/80
Frequency range Operation in the 4910 - 5970 MHz wide band (Note: Allowed frequencies and bands depend on national regulations).
Frequency range 4,9 - 5,970 MHz
Type of antenna Panel
Peak profit 13 dBi
Horizontal beam width 30 degrees
Vertical width of the beam 28 degrees
Hardware data
MAC layer (Media Access Control) Ownership of Cambium
Own physical layer 802.11ac Wave 2 (2x2 MIMO / OFDM)
Ethernet interface 10/100/1000 BaseT, compatible with PoE Cambium and standard PoE discharges
Protocols used IPv4 / IPv6 (Dual Stack), UDP, TCP, ICMP, SNMPv2c, NTP, STP, IGMP, SSH
Network management IPv4 / IPv6, HTTPs, SNMPv2c, SSH, Cambium Networks CnMaestro ™
VLAN 802.1Q with priority 802.1p
VLAN 802.1Q with priority 802.1p
ARQ Yes
Nominal reception sensitivity (w / FEC) at 20 MHz channel MCS0 = -89 dBm to MCS8 (256 QAM-3/4) = -68 dBm
Nominal reception sensitivity (w / FEC) at 40 MHz channel MCS0 = -87 dBm for MCS9 (256 QAM-5/6) = -66 dBm
Nominal reception sensitivity (w / FEC) at 80 MHz channel MCS0 = -84 dBm for MCS9 (256 QAM-5/6) = -61 dBm
Modulation levels (adaptive) MCS0 (BPSK) to MCS9 (256 QAM-5/6)
Transmission power range 0 to +28 dBm (in combination with the regioan EIRP limit) (1 dB interval)
Physical Features Equipment
Surge suppression up to 1 joule (C00000000L065A - for optimal protection, a 30-volt Gigabit surge protector is recommended)
Leakage class IP55
Temperature From -30 ° C to + 60 ° C (from -22 ° F to + 140 ° F)
Weight 0.48 kg (1.05 lbs) (includes integrated mounting bracket)
Resistance to wind gusts to 180 km / h (112 miles / h)
Dimensions (diameter x depth) 13.0 x 20.3 x 5.40 cm (5.1 x 8.0 x 2.1 inches)
Acceptable range of mounting pole diameters 1 - 1.6 inches (2.5 - 4.1 cm) with clamp attached; up to 2.7 inches (5.7 cm) with larger clamp
Energy consumption 12 watts
Input voltage POE passive (nominal 30 VDC); range 14-30 VDC
Security
Encryption 128-bit AES (CCMP mode)
Certificates
FCC Identifier Z8H89FT0048
Industry Canada Cert 109 W-0048
CE EN 301 893 V2.1.1 (5,4 GHz), EN 302 502 V2.1.1 (5,8 GHz)
Part Numbers of Equipment
C058900C701A ePMP 5GHz Force 300-13 SM (FCC) (cable with American plug)
C050900C701A ePMP 5GHz Force 300-13 SM (IC) (cable with Canadian / US plug)
C050900C702A ePMP 5GHz Force 300-13 SM (EU) (cable with EU plug)
C050900C703A ePMP 5GHz Force 300-13 SM (EU) (cable with British plug)
C050900C704A ePMP 5GHz Force 300-13 SM (ROW) (without cable)
C050900C705A ePMP 5GHz Force 300-13 SM (ROW) (cable with American plug)
C050900C706A ePMP 5GHz Force 300-13 SM (ROW) (cable with EU plug)
C050900C707A ePMP 5GHz Force 300-13 SM (ROW) (cable with British plug)
C050900C708A ePMP 5GHz Force 300-13 SM (ROW) (cable with Indian plug)
C050900C709A ePMP 5GHz Force 300-13 SM (India) (cable with Indian plug)
C050900C710A ePMP 5GHz Force 300-13 SM (ROW) (cable with Chinese plug)
C050900C711A ePMP 5GHz Force 300-13 SM (ROW) (cable with Brazilian plug)
C050900C712A ePMP 5GHz Force 300-13 SM (ROW) (cable with Argentinian plug)
C050900C713A ePMP 5GHz Force 300-13 SM (ROW) (cable with ANZ plug)
C050900C714A ePMP 5GHz Force 300-13 SM (ROW) (cable with South Africa plug)
C050900C715A ePMP 5GHz Force 300-13 SM (ROW) (without power supply)

SUPPORT

Introduction to the ePMP

Configure point to point mode on the example of Force 180

Spectrum Analyzer in ePMP series devices

Downloads

Catalogue Card (ENG) Download
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.