Cambium EPMP Force 300-16 ROW | CPE | AC WAVE2 5GHz, 2x2 MIMO,
Cambium EPMP Force 300-16 ROW | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45 1000Mb/s, 16dBi

Cambium EPMP Force 300-16 ROW | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45 1000Mb/s, 16dBi

CODE: C050910C211A
124,05 GBP with VAT
Added to cart
-
+
PCS
AVAILABILITY:
local_shipping SHIPPING: 24h
Maximum wireless transmission speed: 500 Mb/s
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: 5 GHz
more SHOW MORE PARAMETERS

ABOUT PRODUCT

Cambium Networks' client module - reliable connectivity

Wireless service providers around the world are committed to providing reliable connectivity in overcrowded RF environments. As the WiFi spectrum is becoming an increasingly scarce commodity, finding the right solution for broadband connectivity is essential for all types of low and high density deployments. Cambium Networks has taken up this challenge by creating a technological breakthrough that guarantees excellent performance, interference immunity and long range - even in the most dense and noisy environments. Cambium Force 300-16 is an affordable, medium-gain client module for the AP ePMP3000, which combines the latest 80211AC Wave 2 chipsets and field-proven TDD MAC ePMP. It continues the tradition of previous products with an integrated 16 dBi antenna, narrow beam width and reliable mechanics. Supports a peak throughput of over 500 Mb/ s. The Force300-16 client module also features a continuous spectrum analyzer that reports the device status to the WiFi management system.

Features:

  • Cambium ePMP Force 300-16 from Cambium Networks is designed to operate in high interference environments and provides excellent bandwidth - over 500 Mb/ s of actual transfer.
  • Cambium Networks ePMP 300-16 supports variable channel width (from 20 MHz to 80 MHz) and modulates up to 256 QAM.
  • ePMP integrated radio 300-16 supports real-time monitoring of the signal spectrum without compromising capacity.
  • The Force 300-16 supports a local Wi-Fi connection to enable easy installation, configuration and monitoring from any Wi-Fi enabled device.
  • Configurable modes of operation ensure reliable adaptation of both symmetrical and asymmetrical connections, while providing high performance and a delay in both directions from 3-5 ms.
  • QoS management offers three-level traffic prioritization for VoIP, video and data
  • This platform is designed for users who want to keep their own interference reduced while achieving high bandwidth.
  • The device is equipped with a mobile mounting system and the antenna itself has a beam width of 15 degrees and a gain of 16dBi, ePMP 5HHz Force - 16 is a compact subscriber module capable of working in P2P configuration in environments with significant channel noise.
  • Installation is extremely simple thanks to the bracket with which the device can be mounted on a pole or wall.

SPECIFICATION

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Maximum wireless transmission speed 500 Mb/s
Number of LAN ports 1x 10/100/1000BaseTX (RJ45)
Operating frequency 5 GHz
Wireless network standards IEEE 802.11ac Wave 2
Antenna gain 11dBi - 20dBi
Device type Client device, Radioline,
Horizontal beamwidth 15°
MIMO Type 2x2
Region / power Cable ROW/EU
Type of device power supply Passive PoE
Working temperature -30°C to +60°C

Cambium Networks ePMP Force 300 technical specification
MAC layer (Media Access Control) Ownership of CAMBIUM
Own physical layer 2x2 MIMO/ OFDM
Ethernet interface 10/ 100/ 1000 BaseT, compatible with PoE Cambium and standard PoE
Protocols used IPv4/ IPv6 (Dual Stack), UDP, TCP, ICMP, SNMPv2c, NTP, STP, IGMP, SSH
Network management IPv4/IPv6, HTTPs, SNMPv2c, SSH, Cambium Networks CnMaestro ™
ARQ Yes
VLAN 802.1Q with priority 802.1p
Nominal receiving sensitivity (w/ FEC) at 40 MHz channel MCS0 = -87 dBm for MCS9 (256 QAM-5/6) = -64 dBm (per chain)
Nominal receiving sensitivity (w/ FEC) at 20 MHz channel MCS0 = -89 dBm to MCS8 (256 QAM-3/ 4) = -66 dBm (per chain)
Nominal reception sensitivity (w/ FEC) at 80 MH channel MCS0 = -84 dBm for MCS9 (256 QAM-5/6) = -59 dBm (per chain)
Modulation levels (adaptive) MCS0 (BPSK) to MCS9 (256 QAM-5/6)
Physical characteristics
Transmission power range 0 to +29 dBm (total, up to regional EIRP limit) (1 dB interval)
Leakage class IP55
Surge suppression Up to 1 joule integrated (C000000L065A - for optimal protection, a 30 V Gigabit surge protector is recommended)
Temperature From -30° C to + 60° C (from -22° F to + 140° F)
Weight 0.50 kg (1.1 lb) (includes mounting bracket)
Wind blast resistance 180 km/hr (112 miles/hr)
Dimensions (diameter x depth) 12.4 x 25.1 x 11.9 cm (4.9 x 9.9 x 4.7 inches) - with attached mounting bracket
Range of mounting pole diameters 1 - 1.6 inches (2.5 - 4.1 cm) with clamp attached; up to 2.7 inches (5.7 cm) with larger clamp
Energy consumption 12 watts
Input voltage 30 volts
Security
Encryption 128-bit AES (CCMP mode)
Certificates
FCC ID Z8H-89FT0016 **
Industry Canada Cert 109 W-0016 **
CE EN 301 893 V2.1.1 (5.4 GHz), EN 302 502 V2.1.1 (5.8 GHz) **
Part Number device
C058910C112A Cambium Networks ePMP Force 5 GHz Force 300-16 Radio (FCC) (American cable)
C050910C114A Cambium ePMP Force 5 GHz Force 300-16 Radio (IC) (Canada/US cable)
C050910C213A Cambium Networks ePMP Force 5 GHz Force 300-16 Radio (EU) (EU cable)
C050910C313A Cambium ePMP Force 5 GHz Force 300-16 Radio (EU) (UK cable)
C050910C011A ePMP 5 GHz Force 300-16 Radio (ROW) (without cable)
C050910C111A ePMP 5 GHz Force 300-16 Radio (ROW) (US cable)
C050910C211A integrated radio ePMP 5 GHz Force 300-16 Radio (ROW) (EU cable)
C050910C311A ePMP 5 GHz Force 300-16 Radio (ROW) (UK cable)
C050910C411A integrated radio ePMP 5 GHz Force 300-16 Radio (ROW) (Indian cable)
C050910C412A ePMP 5 GHz Force 300-16 Radio (India) (Indian cable)
C050910C511A ePMP 5 GHz Force 300-16 Radio (ROW) (Chinese cable)
Additional information 80211ac wave2
symmetrical and asymmetrical traffic
power 2x2 despite tdma station
hi power 2x2 despite tdma
Radio track specification
Frequency range 4,9 - 5,970 MHz
Antenna type Panel
Peak yield 16 dBi
Horizontal beam width 15 degrees
Vertical width of the beam 30 degrees

SUPPORT

Cambium Networks ePMP Force performance test

Spectrum monitorinng ePMP 300

Introduction to dPMP 300

Downloadable

Product data sheet (ENG) Download
Dedicated datasheet - ePMP 3000 base point Download
Descriptions and instructions of the ePMP series Download

FAQ

What is the wireless standard of Cambium Networks 5 GHz CPE?

Force 130 operates in the IEEE 80211ac Wave2 standard.

What is the capacity of Cambium Force 300-16?

Cambium ePMP is designed to operate in high interference environments and provides excellent bandwidth - over 500 Mb> actual transfer rate.

Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.