Cambium EPMP Force 300-25 EU | CPE | AC WAVE2 5GHz, 2x2 MIMO, R
Cambium EPMP Force 300-25 EU | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45 1000Mb/s, 25dBi

Cambium EPMP Force 300-25 EU | CPE | AC WAVE2 5GHz, 2x2 MIMO, RJ45 1000Mb/s, 25dBi

CODE: C050910C203A
144,46 GBP with VAT
OUT OF STOCK
Maximum wireless transmission speed: 500 Mb/s
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: 5 GHz
more SHOW MORE PARAMETERS
Region / power Cable:

ABOUT PRODUCT

ePMP Force 300-25 system - provides high antenna gain

The ePMP 300-25 Cambium ePMP 300-25 works in 80211ac Wave2 standard, providing maximum throughput up to 500Mbps. The device definitely stands out from the competition with the power of the radio transmitter and a narrow transmission beam. This is an advantage in an environment with significant density (noise) of signals from other WiFi networks. Devices with wide antenna propagation are easy in visualisation (antenna setting), but their wide, non-selective antennas receive not only the signal dedicated to them, but all the foreign ones, thus increasing the noise level and lowering the possible connection speed. Only the use of antennas with a narrow beam width allows, on the one hand, for precise sending of the concentrated signal in the given direction, on the other hand, it minimizes the presence of foreign signals on the transceiver head, which results in a higher connection speed.
Wireless service providers around the world are facing the challenge of providing reliable connectivity due to overfilled RF bands. Free channels have become an increasingly scarce commodity, finding the right equipment to put together a broadband (wireless broadband) connection in such a noisy space has become a necessity. The ePMP Cambium Networks ePMP series is the answer to this challenge and is ideal for low and high density environments.

The printsheet

SPECIFICATION

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Maximum wireless transmission speed 500 Mb/s
Number of LAN ports 1x 10/100/1000BaseTX (RJ45)
Operating frequency 5 GHz
Antenna gain 21dBi - 30dBi
Device type Radioline, Client device,
Horizontal beamwidth 10°
MIMO Type 2x2
Region / power Cable EU/EU
Type of device power supply Passive PoE
Working temperature -30°C to +60°C

Technical Specification CAMBIUM EPMP FORCE 300
Channel spacing in 5 MHz increments
Channel width 20 | 40 | 80 MHz
ARQ Yes
Frequency range Broadband support 4910 - 5970 MHz (Note: allowable frequencies and bands are dictated by national regulations).
Nominal reception sensitivity (w / FEC) at 20 MHz channel MCS0 = -87 dBm to MCS8 (256 QAM-3/4) = -63 dBm
Nominal reception sensitivity (w / FEC) at 40 MHz channel MCS0 = -85 dBm for MCS9 (256QAM-5/6) = -59 dBm
Nominal reception sensitivity (w / FEC) at 80 MHz channel MCS0 = -82 dBm for MCS9 (256QAM-5/6) = -56 dBm
Modulation levels (adaptive) MCS0 (BPSK) to MCS9 (256QAM5 / 6)
Additional information 80211ac wave2
integrated radio
wifi cnpilot
Physical characteristics
Transmission power range 0 to +27 dBm (total, up to regional EIRP limit) (step 1 dB)
Resistance to surges 1 Joule Integrated (C000000L065A - 30 V recommended surge fuse)
Leakage class IP55
Operating temperatures -30 ° C to + 60 ° C (-22 ° F to + 140 ° F)
Weight 2.4 kg (5.3 pounds)
wind resistance 180 km / hour (112 mi / hour)
Dimensions (diameter x depth) 47 cm x 31 cm (18.5 inches x 12.2 inches)
Range of mounting pole diameters 6.4 cm - 7.6 cm (2.5 inches - 3 inches)
Energy consumption 12 watts
Input voltage 30 volts
Security
Encryption 128-bit AES (CCMP mode)
Certificates
FCC Identifier Z8H89FT0017
Industrial certificate 109W-0017
CE EN 301 893 V2.1.1 (5,4 GHz), EN 302 502 V2.1.1 (5,8 GHz)
Part Number device
C050910C203A Cambium epmp 300-25 5 GHz High Gain Radio (EU) (power supply with EU plug)
C050910C001A 80211ac 300-25 5 GHz High Gain Radio (RoW) (without cable)
C050910C201A Cambium networks 300-25 5 GHz High Gain Radio (RoW) (power supply with EU plug)
Antenna specifications
Frequency range 4910 - 5970 MHz
Antenna type Time
Peak yield 25 dBi
3dB horizontal beam width 6-10 degrees
Reverse radiation 25 dB
Cross-polarity 20 dB
3dB vertical beam width 6-10 degrees
Polarisation

SUPPORT

Performance test

Configuration process

Unboxing

Downloads

Data sheet (ENG) Download
Quick Start Guide (ENG) Download
Introduction to the ePMP commandline Download

FAQ

What band does Cambium Networks ePMP 300 work in?

The product operates in 5 GHz force band and its maximum transmission speed is 500 mb/s.

For whom is this product best suited?

This platform is designed for users who want to create high-performance radio connections without disturbing other networks.

Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.