Meraki Go GR10 | Access point | Indoor, Dual-band, 802.11ac Wav
USA (US) / GBP / Prices without VAT
Meraki Go GR10 | Access point | Indoor, Dual-band, 802.11ac Wave 2,2x2:2 MU-MIMO

Meraki Go GR10 | Access point | Indoor, Dual-band, 802.11ac Wave 2,2x2:2 MU-MIMO

CODE: GR10-HW-EU
BARGAIN70,07 GBP73,78 GBP without VAT
Added to cart
-
+
PCS
AVAILABILITY:
local_shipping SHIPPING: 24h
Maximum wireless transmission speed: 1200 Mb/s
Number of LAN ports: 1x 10/100/1000BaseTX (RJ45)
Operating frequency: Dual Band (2.4GHz, 5GHz)
more SHOW MORE PARAMETERS

ABOUT PRODUCT

Cisco Meraki GO GR10 - internal dual-band Wi-Fi access point, 802.11ac Wave 2, 2x2:2 MU MIMO

Meraki Go is a complete network solution - simple, mobile and secure. Thanks to products managed through Meraki Go Mobile App you can set up your network in a few minutes, manage networks
Wi-Fi and Ethernet, configure and update security, update software (firmware) and monitor network status. Enjoy all these capabilities in the cloud without subscription fees.

MERAKI GO GR10-HW-EU Internal Indoor Access Point

Simple and user-friendly solution

The mobile application gives you in-app technical support. Manage access points by adjusting bandwidth to stream video or download files. Block out malicious websites by separating Wi-Fi from specific business tasks. Meraki Go and Security Gateway network switches make it easy and secure to use Ethernet. Advanced settings such as guest Wi-Fi, location, and splash pages require only a few clicks in the app.

Additional security subscription

A security subscription to protect against phishing and malware is also available and can be purchased to provide additional security. Whether your business provides guests with Wi-Fi or runs a corporate network, or protects devices at the point of sale, Meraki Go will make sure your network is both secure and user-friendly.

MERAKI GO GR10-HW-EU

Meraki Go - the most important features

  • Visitor information through location analysis
  • Customizing the welcome page, blocking page access for a specific Wi-Fi or for all connected devices redirected by the Security Gateway
  • Remote port switching on and off
  • Website creation - Wi-Fi for guests
  • In-app support
  • Simple safety configuration
MERAKI GO GR10-HW-EU INDOOR WIFI ACCESS POINT

Welcome pages and location analysis for all, not just for large networks

  • Welcome page - welcome guests with a custom message with your trademark and landing pages
  • Location analysis - can provide a competitive advantage through the use of guest information, help you make business decisions about staff, inventory, offers, promotions and loyalty programs
  • Personalised messages and advertisements for potential customers who come across your business are more likely to convert
  • Capture consumer data of consumers who frequently visit competitors' websites
  • Monitor seasonal traffic and peak hours to forecast traffic and manage stocks and staff

SPECIFICATION

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Maximum wireless transmission speed 1200 Mb/s
Number of LAN ports 1x 10/100/1000BaseTX (RJ45)
Operating frequency Dual Band (2.4GHz, 5GHz)
Wireless network standards IEEE 802.11ac Wave 2
Antenna gain Under 10dbi
Antenna type Integrated
Application Indoor
MIMO Type MU-MIMO 2x2
Numbers of pieces in the package 1-pack
Type of device power supply Power supply, PoE 802.3af,

Technical specification - model GR10

Radio modules 2.4 GHz 802.11b/g/n
5 GHz 802.11a/n/ac
Supported frequency bands (country-specific restrictions apply):
- 2.412-2.484 GHz
- 5.150-5.250 GHz (UNII-1)
- 5.250-5.350 GHZ (UNION-2)
- 5.470-5.600, 5.660-5.725 GHz (UNII-2e)
- 5.725 -5.825 GHz (UNII-3)
Capacities 802.11ac and 802.11n 2 x 2 MIMO with two spatial streams
SU-MIMO and MU-MIMO support
Combining maximum ratio (MRC) and beam forming
Channels 20 and 40 MHz (802.11n), channels 20, 40 and 80 MHz (802.11ac)
Up to 256 QAM in the 2.4 GHz and 5 GHz bands
Aggregation of packages
Antennas Integrated omnidirectional antennas (5.6 dBi gain at 2.4 GHz and 5.3 dBi gain at 5 GHz)
Network Interfaces 1 x Ethernet 10/100/1000 BASE-T (RJ45)
1 x DC power connector (5.5 mm x 2.5 mm, middle, positive)
Power supply PoE power: 37-57 V (compatible with 802.3af)
Alternative 12 V DC input
Power consumption: max. 11 W (802.3af)
Working environment Operating temperature: 0°C to 40°C
Humidity: 5% to 95%, non-condensing
Physical dimensions 202 mm x 123 mm x 26 mm, without feet or mounting plate
Mobility PMK and OKC for fast roaming in layer 2
LED indicators 2 x Ethernet status
1 x power supply/start-up/update software status
Compatibility RoHS
EN 60601-1-2 EMC requirements for Medical Directive 93/42/EEC
Package contents GR10-HW: Meraki Go internal access point
Wall mounting kit and screw kit
Quick start up guide
Power supply and Ethernet cable
Guarantee 1 year equipment warranty

SUPPORT

Technical support and documentation

Meraki Go support site

FAQ

Do I need a subscription key to use Meraki Go?

From October 7, 2019 you no longer need a subscription to create a Meraki Go account or to continue using your previously purchased Meraki Go equipment.

Can I change the channel my Meraki Go access points use?

Meraki Go Access Points use the AutoRF function, which automatically determines, based on various factors, the best channels to use. Meraki Go Access Points wait, if necessary, until there are no customers associated with the transition to a better channel.

Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.