Cisco SF220-24P | Switch | 24x 100Mb/s, 2x SFP/RJ45 Combo, 24x
Cisco SF220-24P | Switch | 24x 100Mb/s, 2x SFP/RJ45 Combo, 24x PoE, 180 W, Managed, Rack

Cisco SF220-24P | Switch | 24x 100Mb/s, 2x SFP/RJ45 Combo, 24x PoE, 180 W, Managed, Rack

CODE: SF220-24P-K9-EU / EAN: 0882658625237
216,71 GBP with VAT
OUT OF STOCK

ABOUT PRODUCT

SF220-24P PoE switch, Cisco 220 series

The SF220-24P is a Cisco-managed switch. It is equipped with 24 Fast Ethernet ports with a throughput of up to 100 Mb/s. All 24 ports additionally support PoE/PoE+ standard. The total power budget for PoE is 180 W, i.e. the maximum power per port is 30 W. The throughput reaches even 6.55 million packets per second. The switch also offers 2 Gigabit Ethernet Combo (SFP/RJ45) ports. The device casing is adapted to standard racks.

Multiple switch management options

The Cisco SF220-24P can be managed in several ways. There is a graphical user interface supported by a browser, editable configuration files that can be uploaded to other switches to speed up the configuration of multiple devices, command line interface (CLI) and management via cloud services.

Cisco SF220-24P 24 PoE ports

Simple, secure and smart networking with the Cisco 220 series

In today's fast-growing business environment, business owners are making increasingly selective choices about their IT investments, including investments in network infrastructure. The network is a key platform for business performance, and its features such as speed, reliability and security are now more important than ever before. With a limited budget it is important to get the best value for money. Smart switches are the answer to these requirements as they provide growing businesses with the right level of network features and capabilities at lower prices.

Cisco® 220 switches are a series of smart switches at an affordable price. Their high performance, ease of use, and security features allow you to build a robust business network within a limited budget. The powerful features of these switches make them far outperform ordinary unmanageable switches, while providing lower costs compared to fully managed switches. The product comes with a limited, lifetime warranty.

The Cisco 220 series includes a wide range of intelligent switches that provide Fast Ethernet and Gigabit Ethernet with Power over Ethernet (PoE) options. With an intuitive network interface, energy-efficient technologies and rich customizable features, these switches not only improve your business performance, but also ensure high network performance for the future.

Cisco Switch SF220-24P PoE

Features and benefits

Smart switches are usually cheap, but have limited functionality. The Cisco 220 series switches, on the other hand, offer high functionality for growing companies while maintaining low price.

Easy, flexible management

The Cisco 220 series switches are easy to implement and use for non-IT users and industry professionals alike. They offer management options such as simple network management protocol (SNMP), command line interface (CLI) as well as an intuitive graphical web interface and Cisco FindIT utility.

● Power over Ethernet Plus

PoE+ streamlines deployment of wireless access points, IP telephony and video surveillance, enabling power and data transmission over a single network cable. Some Cisco 220 series switches support PoE+, which provides up to 30 watts per port.

A higher level of safety and intelligence

Data flow-based access control (ACL) and QoSLists give you greater control over network performance, ensure the integrity of business critical information, and enable greater network efficiency.

SPECIFICATION

Technical specifications - model SF220-24P

Hardware parameters
Buttons RESET button
Type of cabling Category 5 or better twisted pair cable
LED lights System, Link/Act, Speed
Flash Memory 32 MB
CPU memory 128 MB
Ports 24 Fast Ethernet + 2 Gigabit (SFP+Ethernet) ports Combo
Packet Buffer 4.1 Mb
Supported SFP modules MGBSX1, MGBLX1, MGBLH1, MGBBX1, MGBT1
Environmental and physical characteristics
Dimensions 440 mm x 44 mm x 250 mm
Weight 3.64 kg
Power supply 100-240 V, 50-60 Hz, integrated
Certificates UL (UL 60950), CSA (CSA 22.2), CE, FCC Part 15 (CFR 47) Class A, C-tick
Ambient temperature during operation 0°C - 50°C
Temperature during storage -20° C to 70° C
Ambient humidity during operation 10% to 90%, relative, non-condensing
Ambient humidity during storage 10% to 90%, relative, non-condensing
Energy consumption 21.1 W
With PoE max. 188.5 W
Fans 2 pieces /6300 rpm with fan speed control
Guarantee
Guarantee period Limited hardware warranty for life
Package contents Cisco 220 Series Ethernet switch
Power Cable
Mounting kit
Console cable
Brief instruction manual
Power over Ethernet
802.3af PoE or 802.3at PoE+ Switches support 802.3af, 802.3at and Cisco pre-standard (legacy) PoE with maximum power of 30 W per port
Number of ports supporting PoE 24
PoE power budget 180 W
Pre-standard PoE Cisco Pre-Standard PoE support
Intelligent PoE power management Support for power output negotiation with CDP/LLDP communication with devices after IEEE classification
Performance
Switching capacity 8.8 Gb/s
Capacity (64 byte packs) 6.55 mpps
Switching in layer 2
MAC Table Up to 8192 MAC addresses
Spanning Tree Protocol (STP) Support for 802.1d Spanning Tree, default use of 802.1w enabled (Rapid Spanning Tree [RSTP])
Multiple instances of Spanning Tree using 802.1s (MSTP)
16 instances are supported
Grouping of ports Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
● up to 8 groups
up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad aggregate connection
Load balancing based on source and target MAC address or source and target MAC/IP address
VLAN Supports up to 256 VLANs simultaneously
VLANs based on ports and tags 802.1Q
VLAN network management
Guest VLAN
Auto voice VLAN Voice data is automatically assigned to a voice specific VLAN and processed using appropriate QoS rules.
QinQ VLAN VLANs transparently intersect the network of service providers while isolating traffic among customers
Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) Protocols for automatic expansion and configuration of VLANs in a bridged domain
Head-Of-Line (HOL) blocking Prevention of HOL blockades
Jumbo frame Supported frame sizes up to 9216 B
Feedback loop detection Feedback loop detection provides loop protection by transmitting loop protocol packets from ports where loop protection has been enabled
Works independently of STP
Auto MDIX Automatically adjusts data transmission and reception on cable pairs if the wrong cable type (cross or straight cable) is installed
Safeguards
ACLs Packet rejection and delimitation based on source and destination MAC, VLAN ID or IP address, protocol, port , Differentiated Services Code Point (DSCP)/IP precedence, source and destination ports TCP/UDP, 802.1p priorities, Ethernet type, ICMP packets, IGMP packets
Support for up to 512 rules
Port security Creates the ability to block source MAC addresses to ports; limits the number of MAC addresses known
IEEE 802.1X 802.1X: RADIUS authentication; VLAN for guests
Single host, multiple host and multisession mode
RADIUS, TACACS+ Supports RADIUS and TACACS authentication; the switch acts as a client
Filtering of MAC addresses Supported
Storm protection Broadcasting, multicast and unknown unicast
Protection against DoS Preventing DoS attacks.
STP Bridge Protocol Data Unit (BPDU) Guard This safety mechanism protects the network against incorrect configurations
The port enabled for the BPDU Guard is disabled if a BPDU message is received on this port
Spanning Tree Loop Guard This function provides additional protection against layer 2 redirection loops (STP loops)
Secure Shell Protocol (SSH) SSH is a safe replacement for Telnet traffic
SCP also uses SSH
SSH v1 and v2 are supported
Security layer (SSL) SSL support: encrypts all HTTPS traffic, allowing highly secure access to the browser-based graphical management interface in the switch
QoS
Priority levels 8 hardware levels per port
Schedule Strict priority and Weighted Round-Robin (WRR) based on DSCP and service class (802.1p/CoS)
Class of service Port based; 802.1p based on VLAN priority; IPv4/v6 priority, service type (ToS) and DSCP based; DiffServed services; ACL classification and recharging, trusted QoS
Limitation of transmission speed Ingress policer; outbound bandwidth limiting and bandwidth control; VLAN-based, port-based and flow-based
Avoiding congestion TCP congestion avoidance algorithm is required to limit and prevent losses of global TCP synchronisation
Multicast
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 Snooping IGMP limits high-bandwidth multicast traffic to requesters only; supports 256 multicast groups
IGMP querier Querier IGMP is used to operate the Layer 2 snooping switches multicast domain in the absence of a multicast router
Standards
IPv6
Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, 1042, 1071, 1123, 1141, 1155, 1157, 1350, 1533, 1541, 1624, 1700, 1867, 2030, 2616, 2131, 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC 1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1493, RFC 1215, RFC 3416
IPv6 IPv6 host mode
IPv6 over Ethernet
IPv6/IPv4 double stack
Detection of neighbor and IPv6 (ND) router
Automatic address configuration without IPv6 status.
Path Maximum Transmission Unit (MTU)
Double address detection (DAD)
ICMP version 6
IPv6 ACL Hardware rejection or speed limiting of IPv6 packets
IPv6 QoS Hardware prioritization of IPv6 packets
Multicast Listener Discovery (MLD v1/2) Snooping Delivering IPv6 multicast packets only to selected receivers
IPv6 applications Web/SSL, Telnet server/SSH, DHCP Client, DHCP Autoconfig, CDP, LLDP
Management
User interface Built-in switch configuration tool for easy configuration of devices in the browser (HTTP/HTTPS)
Supports configuration, system desktop, system maintenance and monitoring
Editable configuration files Configuration files can be edited with a text editor and uploaded to another switch to facilitate mass deployment
Command line interface Script CLI; full CLI is supported
Supported user rights levels 1 to 15
Cloud services Support for the Cisco FindIT Network Manager
SNMP SNMP versions 1, 2c and 3 with SNMP Traps support and version
SNMP 3 based on the User Security Model (USM)
Remote monitoring (RMON) The built-in RMON program supports 4 RMON groups (history, statistics, alarms and events) for better traffic management, monitoring and analysis
Dual IPv4 and IPv6 stack Coexistence of both piles of protocols to facilitate migration
Port cloning Traffic on a port or VLAN can be reflected in another port for analysis using a network analyser or RMON probe.
Up to 8 source ports can be mirrored to one destination port
Four sessions are supported
Firmware update Web browser update (HTTP/HTTPS) and Trivial File Transfer Protocol (TFTP)
Dual images for flexible firmware updates
DHCP (Options 12, 66, 67, 82, 129 and 150) DHCP options allow tighter control from a central point (DHCP server) to obtain the IP address, auto-configuration (with download of configuration file), DHCP relay and host name
Time synchronization Simple Network Time Protocol (SNTP)
Other management methods HTTP/HTTPS, TFTP update, DHCP BOOTP client, cable diagnostics, ping, traceroute, syslog
Discovery
Bonjour The switch is announced by means of Bonjour protocol
Connection Layer Detection Protocol (LLDP) (802.1ab) with LLDP-MED extensions LLDP allows the switch to broadcast its identification, configuration and capabilities to adjacent devices that store data in MIB
LLDP-MED is an LLDP extension that adds extensions needed for IP phones
Cisco Discovery Protocol The switch is broadcast via the Cisco Discovery Protocol
View brief information about connected Cisco network devices, IP phones and wireless access points
Energy efficiency
Compliant with IEEE (802.3az) Support for 802.3az Energy Efficient Ethernet on all ports
Significant reduction in energy consumption when bandwidth is not fully utilized
Energy detection Automatically turns off power on Gigabit Ethernet and 10/100 RJ-45 ports when no connection is detected on the port
The port is activated again without packet loss when the switch detects a connection
LED switch-off LEDs can be manually switched off to save energy
Temporary PoE PoE power can be switched on or off based on a user-defined schedule to save energy
Temporary use of the port Lifting a port or disabling it on the basis of a user-defined schedule (when the port is administratively lifted)

SUPPORT

Downloads:

Description of Cisco 220 series switches (ENG) Download
Brief instruction manual - 220 series (ENG) Download
Administrator's Guide - 220 series (ENG) Download
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.